Your favorite soldering irons/stations.

Frequently asked questions about tools and instruments used in stompbox development.

Your favorite soldering irons/stations.

Postby matt239 » 22 Mar 2014, 22:21

What are some of your favorite soldering irons/stations?
Tools, tips?

I'm looking for an inexpensive upgrade to my Weller 40W pencil.
It's been great for through hole boards, and using sockets for ICs,
- but replacement tips seem a little hard to find, and I need something smaller with more kinds of tips to do occasional SMDs.
matt239
Solder Soldier
 
Posts: 215
Joined: 11 Sep 2010, 19:54
Has thanked: 61 times
Have thanks: 5 times

Re: Your favorite soldering irons/stations.

Postby onebuzz » 23 Mar 2014, 00:56

I like the Hakko FX-888D and the Weller WES51. Each around 100 in American dollars. Lots of tips availiable. I use mainly chisel style tips in the 1.5 to 2.5mm for my pedal stuff. I don't know much about SMD though. All my projects are turret board or thru hole.
onebuzz
 
Posts: 27
Joined: 23 Sep 2011, 01:00
Has thanked: 65 times
Have thanks: 6 times

Re: Your favorite soldering irons/stations.

Postby John Coloccia » 11 Apr 2014, 02:36

I usually recommend the Hakko. My preference would be the 936/FX-888 (though I hate the FX-888 doesn't stack). FX-888D if you can't find the other two. I'd say to be very careful and only buy from a reputable source because there are tons of fake Hakkos clones out there floating around. Personally, I have an older FP-101 that I love, and more recently a JBC station. The JBC is pricey, but it's the best I've ever used at any price, including Metcal.
John Coloccia
 
Posts: 8
Joined: 08 Nov 2013, 23:15
Has thanked: 0 time
Have thanks: 1 time

Re: Your favorite soldering irons/stations.

Postby Dirk_Hendrik » 11 Apr 2014, 09:38

Pewsonal favourite is Metcal. However my bench has 2 Weller WECP20 which are cheaper and replacement tips are more widely available at this global location.

And from that perspective,
Giving you global location "could" influence the suggestion for a best choice. I have never seen a "hakko" here.
Sorry. Plain out of planes.

http://www.dirk-hendrik.com
User avatar
Dirk_Hendrik
Old Solderhand
 
Posts: 4089
Joined: 03 Jul 2007, 09:44
Location: Old Amsterdam
Has thanked: 244 times
Have thanks: 972 times

Re: Your favorite soldering irons/stations.

Postby astrobass » 25 Apr 2014, 16:35

I got a Weller WES51 station two weeks back and I love it and don't know how I lived prior to owning it.
astrobass
Cap Cooler
 
Posts: 548
Joined: 02 Mar 2013, 02:30
Has thanked: 50 times
Have thanks: 71 times

Re: Your favorite soldering irons/stations.

Postby lasermonkey » 27 Apr 2014, 03:36

I have a couple of Weller PS3/TCP soldering stations which I bought off an old employer for £5 each when they changed over to Metcal soldering stations.
The Wellers are great; simple to use, easy to repair and generally dependable. The Metcals were amazing though, a quantum leap over anything else I have used. I had one of the desolder guns too, which was an absolute joy to use.
User avatar
lasermonkey
 
Posts: 38
Joined: 27 Oct 2010, 22:00
Has thanked: 31 times
Have thanks: 18 times

Re: Your favorite soldering irons/stations.

Postby Ice-9 » 19 Jul 2014, 22:55

The mention of Weller irons reminds me I have hiding in a cupboard I have a Weller AG700 hot air Iron and a EH1000 hot plate repair station. Must dig them out and see if they still work.
At the moment I have been using an Antex 660TC, cheap and reliable and fits on my bench.
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?
User avatar
Ice-9
Diode Debunker
 
Posts: 969
Joined: 31 Mar 2009, 16:29
Has thanked: 117 times
Have thanks: 327 times


Return to Electronics Tools

Who is online

Users browsing this forum: No registered users and 1 guest