Fuzz Factory Oscillation/Phase Theory

Forum dedicated to helping people debug and troubleshoot non-functional pedals or builds. Please use an clear and informative title, indicating circuit and basic problem. Don't forget to mark the issue as fixed if this is the case.
Post Reply
User avatar
Mr. SD-1
Information
Posts: 20
Joined: 07 Mar 2009, 00:00
Been thanked: 1 time

Post by Mr. SD-1 »

Hi,

Why does the Fuzz factory self-oscillate? Where is the feedback loop? Is the oscillation related to the NPN/PNP integration?

Also... The Fuzz Factory has 3 transistors. Is the effected signal 180 degrees out of phase relative to the bypass signal?

Thanks,
SD-1

Schematic: http://t-giken.up.seesaa.net/image/FUZZ20FUCTORY.JPG

User avatar
soulsonic
Old Solderhand
Information
Posts: 3880
Joined: 27 Jun 2007, 03:38
my favorite amplifier: Traynor YVM-1
Completed builds: too many!
Location: Morgantown, WV
Has thanked: 183 times
Been thanked: 467 times
Contact:

Post by soulsonic »

The Fuzz Factory doesn't have a feedback loop to create its oscillation. It oscillates because it is an unstable circuit. The feedback that causes its oscillation comes from poorly controlled currents happening between different elements of the circuit. Many fuzzes are able to have this "feature" if you design/build it carelessly. The oscillating in the Fuzz Factory is controlled by the "Stab" knob, which varies the voltage to the circuit, which in turn affects how it oscillates.
"Analog electronics in music is dead. Analog effects pedal design is a dead art." - Fran

User avatar
tubehead123
Information
Posts: 8
Joined: 10 Jan 2011, 18:33
Has thanked: 2 times
Been thanked: 4 times

Post by tubehead123 »

for a circuit to oscillate it has to satisfy the barkhausen criterion: have 180 deg. of phase shift or greater _at a frequency where there is positive gain_. this can be done by a phase shift oscillator deliberately or accidentally by incorrect frequency compensation, which is what's going on here. the circuit has no compensation elements, e.g. a capacitor from collector to base (miller capacitor) so the high frequency response is uncontrolled basically. any variation in device type or wiring related stray impedances can cause varying gains in the high frequency region, so if there is enough phase shift due to additional stray capacitance along with enough gain (which there is a ton of in this circuit) you can get oscillation.

Post Reply