Stereo and Mono output

All frequent questions on switching: true or not true bypass, transistor-based or mechanical.

Stereo and Mono output

Postby fishfude » 30 Dec 2014, 20:17

Hi Folks,

I working on a stereo circuit at the moment which will have a stereo 1/4" output. What if I wanted to get a mono signal from this? Could I just plug in a mono 1/4" lead? Or would this double the strength of the signal? Would it be better to have a seperate output that has combined the stereo signals in some appropriate way?

Cheers,

ff
fishfude
Breadboard Brother
 
Posts: 65
Joined: 14 Mar 2012, 21:18
Has thanked: 42 times
Have thanks: 0 time

Re: Stereo and Mono output

Postby Nocentelli » 30 Dec 2014, 21:37

It's probably easier to advise if we could see the schematic...

If it's a stereo effect with two unique output signals (e.g ping pong stereo delay) you would normally have two separate outputs, designated left (mono) and right (stereo): If you use both outs (e.g to two amps or DI channels) you get the ping pong effect; If you use switching jacks you have the option to have the right output summed with the left when you only use the left output and the right has no jack inserted. In this example, there should not be a problem with signal overload: there would just be twice as many repeats down the single channel, and you might want to dial back the delay mix to mitigate.
brownwhopping wrote:How can I learn by reading threads an making circuits, when some day I can see a lawsuit or somebody beat me in the face for that?
User avatar
Nocentelli
Tube Twister
 
Posts: 2086
Joined: 09 Apr 2009, 08:06
Location: Leeds, UK
Has thanked: 859 times
Have thanks: 837 times


Return to Switching & Wiring

Who is online

Users browsing this forum: No registered users and 2 guests

cron