Resistor/capacitor combo at +9V

Frequent asked about building blocks: gain stages, buffers, clipping configurations, ...

Resistor/capacitor combo at +9V

Postby fishfude » 18 Jun 2013, 14:50

Hey folks,

I think this should be a simple one, but I was wondering what the 2.2k resistor and 100uF cap combo at the +9v input on this Tim Escobedo, 'Calavera', circuit snippet was for? Is it simply a filter (low pass?)? Also, are the other 0.1uF caps just for DC filtering?

Image

Thanks!

ff
fishfude
Breadboard Brother
 
Posts: 65
Joined: 14 Mar 2012, 21:18
Has thanked: 42 times
Have thanks: 0 time

Re: Resistor/capacitor combo at +9V

Postby teleK » 18 Jun 2013, 15:25

the resistor and capacitor make sure there is only DC coming into the circuit, the other capacitors make sure only AC enter and leave the circuit
teleK
Breadboard Brother
 
Posts: 72
Joined: 24 Aug 2010, 03:59
Has thanked: 18 times
Have thanks: 3 times

Re: Resistor/capacitor combo at +9V

Postby fishfude » 18 Jun 2013, 19:21

That's what I thought, but why would you have to worry about AC coming from a battery?

Thanks,

ff
fishfude
Breadboard Brother
 
Posts: 65
Joined: 14 Mar 2012, 21:18
Has thanked: 42 times
Have thanks: 0 time

Re: Resistor/capacitor combo at +9V

Postby Nocentelli » 18 Jun 2013, 20:32

It tells you on the schematic: "The RC network on the power supply is neccessary to keep oscillations down and power consumption reasonable".

The resistor from +9v to large electro cap to ground is common to many pedals: It is a low pass filter with an extremely low cut-off frequency, designed to send pretty much any AC present in the power supply (from a poor quality AC-DC adaptor, from another electrical device sharing the same power outlet, or perhaps induced by nearby audio signals in wires, or induced within the circuit itself) to ground. Some oscillating fuzz "designs" will not work properly if this power filtering is present. The resistor will drop the supply voltage somewhat, and resistors around 47ohm or 100ohm are usually used to minimise the voltage drop whilst still forming a suitable RC filter. Here, the higher-than-average resistor value also serves to reduce the power consuption of the circuit. Many of Escobedo's circuit snippets use low power consumption as a selling point, which is only really valid if you use batteries.
mmolteratx wrote:absolutely zero commercial use allowed. If I find anyone selling these, I'll fly to your house and kick you in the nads. And you may or may not find yourself in trouble.
User avatar
Nocentelli
Tube Twister
 
Posts: 2017
Joined: 09 Apr 2009, 08:06
Location: Leeds, UK
Has thanked: 767 times
Have thanks: 761 times

Re: Resistor/capacitor combo at +9V

Postby fishfude » 18 Jun 2013, 23:15

Ah yeah, sorry, so it does! Thanks for the other info though!

ff
fishfude
Breadboard Brother
 
Posts: 65
Joined: 14 Mar 2012, 21:18
Has thanked: 42 times
Have thanks: 0 time


Return to Circuit Blocks

Who is online

Users browsing this forum: Google [Bot] and 2 guests