Where can I find a PCB layout for a voltage doubler?
- jimosity
- Breadboard Brother
I'd like to build a voltage doubler that will allow me to run my Crunch Box at 18 volts instead of 9.
Are there any good schematics / pcbs / layouts that will give me 18v out of a 9v power supply?
I've tried searching and I find skeptical results...one says it's really only putting out 15 volts and the others are so old of posts that I wonder how relevant they are.
Thanks guys.
Are there any good schematics / pcbs / layouts that will give me 18v out of a 9v power supply?
I've tried searching and I find skeptical results...one says it's really only putting out 15 volts and the others are so old of posts that I wonder how relevant they are.
Thanks guys.
- TragicTravisty
- Solder Soldier
Information
- Posts: 188
- Joined: 11 Aug 2008, 21:42
well you can run it up to 25 volts, why not do that?
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 277 times
https://www.freestompboxes.org/download/ ... id=774&t=1
go to mutron c200 wah vol....it is good and working
go to mutron c200 wah vol....it is good and working
- alteredsounds
- Resistor Ronker
You can pretty much just copy the bottom left side of the Sagiterius (bad spelling! mini-klon) pcb. That's essentially the charge pump section (chip, caps, 1n4001 diodes and a protection diode.)
- Greg
- Old Solderhand
culturejam wrote: We are equal opportunity exposure artists.
- RLBJR65
- Resistor Ronker
Information
- modman
- a d m i n
Information
- Posts: 4890
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4394 times
- Been thanked: 2131 times
You can always use such a small circuit to have a go on the DIY Layout Creator.
Some more links that were not posted yet.
Analogguru's Split Supply with a 555
18V from a MAX1044 by Soulsonic
Voltage Double circuit with a MAX1044 on Geofex
Some more links that were not posted yet.
Analogguru's Split Supply with a 555
18V from a MAX1044 by Soulsonic
Voltage Double circuit with a MAX1044 on Geofex
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal