A question about LFO's.

Frequent asked about building blocks: gain stages, buffers, clipping configurations, ...
Post Reply
User avatar
MakuseruSukotto
Information
Posts: 18
Joined: 15 Jun 2008, 01:50
Been thanked: 3 times

Post by MakuseruSukotto »

Ok, say I have a schematic that has one control(potentiometer), how could I make it so that I can use an LFO to control the value in that one potentiometer?

Thanks for the help.

User avatar
cpm
Resistor Ronker
Information
Posts: 276
Joined: 29 Oct 2008, 09:55
Location: spain
Been thanked: 50 times

Post by cpm »

the most general solution would be an LED+LDR combo, with the adjustments to match the pot resistance.
Some circuits may accept some tricks like using a transistor to sink current, like done on the echobase delay
Another tricky thing is also to match a linear or log response.

Post Reply