how to cut those frequencies?
- AbuseArt
- Breadboard Brother
Information
- Posts: 127
- Joined: 24 Mar 2009, 22:17
- my favorite amplifier: laney lc15
- Completed builds: Vox Clyde McCoy
Rebote Delay 2.5
Tube Screamer TS-808
Exotic AC Booster
Marshall Guv'nor
Big Muff Pi
Big Muff Triangle
EH Pulsar
Joe's Simple Overdrive - Location: Poland
- Contact:
Hi!
I need to add this equalizer to my Rebote Delay. I dont need any controls. I just need THIS setting.
I need to add this equalizer to my Rebote Delay. I dont need any controls. I just need THIS setting.
- Electron Tornado
- Breadboard Brother
These might help:
http://www.captain.at/electronics/active-filter/
http://changpuak.ch/electronics/Simple_Bandpass.html
http://www.wa4dsy.net/robot/bandpass-filter-calc
http://www.captain.at/electronics/active-filter/
http://changpuak.ch/electronics/Simple_Bandpass.html
http://www.wa4dsy.net/robot/bandpass-filter-calc
"Ah, data, the missing link!"
"Look, anybody can drill a hole, but if you want it misaligned or off center, then I'm your man!"
"Look, anybody can drill a hole, but if you want it misaligned or off center, then I'm your man!"
- AbuseArt
- Breadboard Brother
Information
- Posts: 127
- Joined: 24 Mar 2009, 22:17
- my favorite amplifier: laney lc15
- Completed builds: Vox Clyde McCoy
Rebote Delay 2.5
Tube Screamer TS-808
Exotic AC Booster
Marshall Guv'nor
Big Muff Pi
Big Muff Triangle
EH Pulsar
Joe's Simple Overdrive - Location: Poland
- Contact:
thanks, thats very good stuff.
What kind of amp should I use?
What kind of amp should I use?
- earthtonesaudio
- Transistor Tuner
In general, you either shunt all the frequencies except the one you want, to ground,
OR
Shunt the frequency you want to ground, but do it in a negative feedback loop so you get out the opposite.
OR
Shunt the frequency you want to ground, but do it in a negative feedback loop so you get out the opposite.
rocklander wrote:hairsplitting and semantics aren't exactly the same thing though.. we may need two contests for that.