Sorry, you are right I did look at the wrong schematic when I wrote those component names.
What I did is remove the input and output buffers. So my input comes into R3, which I changed to 1M (but this still clicks when I hit the bypass switch??) I removed C4, R8, C5, R20, C9, R11, and R18. I changed C3 to 220n, R6 to 1k, and C8 to 15uf. And output from lug 2 on R21.
I added a three way switch to switch between mosfets, leds, and diodes for the clipping.
I added a baxandall tone stack between pin 1, and pin 5 of the IC.
I got this to work, with unity gain now. But when I turn the bass control to zero I get a high treble kind of shorted sound??
Thanks Dirk, I will look at that schematic and look for ideas.
I am just doing all this to experiment. I have mage about 20 some distortion pedals from layouts, and pcb found on these forums. Now I want to try different values, and adding one part here and another part there.
Thanks for all your help with this!!!
You do not have the required permissions to view the files attached to this post.