help identify 3 pots

Ok, you got your soldering iron and nothing is going to hold you back, but you have no clue where to start or what to build. There were others before you with the same questions... read them first.
Post Reply
User avatar
registracii
Information
Posts: 45
Joined: 08 May 2012, 10:13
Location: Ireland
Has thanked: 5 times

Post by registracii »

Hi guys,
Iam trying to make really old phaser usable again, the pots are really bad and need replacement, but I am not sure what to buy.
They have on them D47kMA 0.25W for the depth and regeneration and DM22A 0.25W for the speed.
What pots should I use as replacement?

Thanks

User avatar
Duckman
Opamp Operator
Information
Posts: 1492
Joined: 20 May 2009, 01:45
Has thanked: 320 times
Been thanked: 134 times

Post by Duckman »

D47kMA = 47k Log. 50k will work, too.
DM22A = no k after the 22 but try 20k or 25k log

Can´t you measure with your DMM? Take them out and check value between lug 1 and lug 3. That will be more accurate, for sure.

Post Reply