Beginner for PTP Pedals

Ok, you got your soldering iron and nothing is going to hold you back, but you have no clue where to start or what to build. There were others before you with the same questions... read them first.
Post Reply
User avatar
ltjazz
Information
Posts: 1
Joined: 25 Dec 2012, 18:53

Post by ltjazz »

Hey all,

I want to get into making pedals using point-to-point wiring on vero/perfboard. Like these beauties http://www.jimmybehanfx.net/custom/fuzz-face

My main issue is I have no experience with electronics, but I'm not looking to become a master...just have the ability to read some basic schematics and assemble some cool pedals.

Are there any recommendations for resources to learn how to read schematics and layouts well? Where do I even begin? As for the soldering, I have a couple of cheap, basic kits to learn with.

Thanks for the help!

User avatar
Seiche
Old Solderhand
Information
Posts: 2526
Joined: 01 Nov 2010, 00:16
Location: Germany
Has thanked: 231 times
Been thanked: 189 times

Post by Seiche »

how about https://www.diystompboxes.com as well as this subfolder, especially "absolute beginner's" (which you already discovered).

as for reading schematics, practice. Try to find out what all the symbols mean and stand for (there are several resources for that).
gaussmarkov also comes to mind.

User avatar
Nocentelli
Tube Twister
Information
Posts: 2222
Joined: 09 Apr 2009, 07:06
Location: Leeds, UK
Has thanked: 1152 times
Been thanked: 954 times

Post by Nocentelli »

For veroboard layouts, the first link is a nice step-by-step tutorial that shows how to make a Colorsound one knob fuzz (pretty much a fuzzface running at full gain) based on the schematic found in the second link - Print out both layout and schematic to see how schems and vero layouts are related, and build yourself a cool fuzz into the bargain.

http://aronnelson.com/gallery/main.php/ ... O.jpg.html

http://fuzzcentral.ssguitar.com/schemat ... obfuzz.gif

Note that the vero layout has an extra 1 Megohm resistor at the input to prevent footswitch pop, and also uses a 820 ohm resistor instead of the schematic's 82 ohm (anything between 82 ohm up to 1 kilohm sounds ok).
modman wrote: Let's hope it's not a hit, because soldering up the same pedal everyday, is a sad life. It's that same ole devilish double bind again...

Post Reply