Built an OCD - a few tips needed

Forum dedicated to helping people debug and troubleshoot non-functional pedals or builds. Please use an clear and informative title, indicating circuit and basic problem. Don't forget to mark the issue as fixed if this is the case.
Post Reply
User avatar
hakanenlauri
Information
Posts: 18
Joined: 24 May 2010, 12:23

Post by hakanenlauri »

Hi there.

I just finished my vero lay-out (Stratotrasto version) of the OCD nad got it to work most of the way. I do have some additional problems, however.

1) When the drive pot is all the way up the sound gets very stuttery and tremolo-esque.
2) There is a bit of an unwanted distorted "tail" (quite harsh and trebly) as the desired distortion sound fades away. Mostly this is present when drive levels are low or moderate, but is also noticeable when the drive levels are higher.

Any ideas on these problems?

Thanks in advance!

Lauri

Post Reply