Amptweaker - Tight Metal  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Re: Amptweaker - Tight Metal

Postby J0K3RX » 11 Jul 2016, 11:52

Stupid question... How did Crumbchildz become the "Author" of this topic thread? :scratch:
User avatar
J0K3RX
Degoop Doctor
 
Posts: 899
Joined: 29 Jun 2011, 02:25
Location: US Florida
Has thanked: 247 times
Have thanks: 344 times

Re: Amptweaker - Tight Metal

Postby Ice-9 » 11 Jul 2016, 16:30

J0K3RX wrote:Stupid question... How did Crumbchildz become the "Author" of this topic thread? :scratch:


Hmm, rather strange me thinks. :hmmm:
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?
User avatar
Ice-9
Diode Debunker
 
Posts: 963
Joined: 31 Mar 2009, 16:29
Location: Newcastle UK
Has thanked: 116 times
Have thanks: 326 times

Re: Amptweaker - Tight Metal

Postby grrrunge » 14 Jul 2016, 14:39

J0K3RX wrote:Stupid question... How did Crumbchildz become the "Author" of this topic thread? :scratch:

Probably a database burp ;) Sometimes stuff like that happens during maintenance. The weird thing is that your user ID's aren't even close :scratch:
A true believer in the magic of Sherwood Forest Pedal Pirates
---
New base of operations: http://www.knucklehead.dk
User avatar
grrrunge
Diode Debunker
 
Posts: 735
Joined: 20 Mar 2010, 11:51
Location: Copenhagen, Denmark
Has thanked: 56 times
Have thanks: 193 times

Re: Amptweaker - Tight Metal

Postby Blitz Krieg » 18 Jul 2016, 07:55

threads merged?
User avatar
Blitz Krieg
Breadboard Brother
 
Posts: 82
Joined: 18 Feb 2014, 11:57
Has thanked: 577 times
Have thanks: 4 times

Re: Amptweaker - Tight Metal

Postby J0K3RX » 21 Jul 2016, 02:59

Blitz Krieg wrote:threads merged?


Yeah, looks that way :hmmm: maybe they should be added to the ass end or better yet a sub-thread..
User avatar
J0K3RX
Degoop Doctor
 
Posts: 899
Joined: 29 Jun 2011, 02:25
Location: US Florida
Has thanked: 247 times
Have thanks: 344 times

Re: Amptweaker - Tight Metal

Postby jmpj45 » 20 Sep 2016, 00:16

I need some help does anybody know what kind of switch is the gate and thrash switch. Are they on/off or on/off/on
jmpj45
 
Posts: 2
Joined: 25 Mar 2014, 02:29
Has thanked: 0 time
Have thanks: 0 time

Re: Amptweaker - Tight Metal

Postby J0K3RX » 20 Sep 2016, 04:06

jmpj45 wrote:I need some help does anybody know what kind of switch is the gate and thrash switch. Are they on/off or on/off/on


on/off
User avatar
J0K3RX
Degoop Doctor
 
Posts: 899
Joined: 29 Jun 2011, 02:25
Location: US Florida
Has thanked: 247 times
Have thanks: 344 times

Re: Amptweaker - Tight Metal

Postby modman » 20 Sep 2016, 20:38

J0K3RX wrote:Stupid question... How did Crumbchildz become the "Author" of this topic thread? :scratch:

Dude, please... yeah I merged the threads, and you are absolutely right, that first batch of post contained no info.
Wish I had time to go through the other 23 pages of replies...
"The whole point of diy is diy. It's not dsoiyathodtr - do some of it yourself and then have others do the rest" (paulc)
User avatar
modman
a d m i n
 
Posts: 4193
Joined: 19 Jun 2007, 17:57
Has thanked: 2650 times
Have thanks: 431 times

Re: Amptweaker - Tight Metal

Postby MoonWatcher » 24 Sep 2016, 15:54

richard44 wrote:I have not yet tried running this at 18V, but James Brown in his demo showed it gave the pedal a more expansive, less compressed sound. Apropos to that, if I had to build this pedal again, I might add a 18V/9V switch with a voltage double in the circuit.

I finally got around to building one a little while back. I prefer having the gain lower than what I imagine the average (metal playing) user might go for, and I built this to the Tight Rock specs.

When used in this way, I think the higher voltage is almost a necessity, because it seems to eliminate unpleasant higher order harmonics (that seem to be coming from the op amps themselves). For super heavy distortion, I don't think there's an obvious advantage to anything higher than 9V - you'd really only need it for playing stuff that had a big dynamic range.

It really does seem to be a cool pedal. My only complaint is that when I roll down my guitar's volume, it sounds like a sitar, or like there is a biasing issue. I wouldn't be surprised if I had a minor error in my build, but it would have to be minor, because the pedal sounds great otherwise, and I only run it at 18V with the gain low. And since the gain is never set high, I was able to remove the gate altogether.
MoonWatcher
Diode Debunker
 
Posts: 717
Joined: 28 Jul 2008, 13:27
Has thanked: 42 times
Have thanks: 59 times

Re: Amptweaker - Tight Metal

Postby EmmG » 28 Sep 2016, 19:04

What about this on a 4 position rotary switch? I don't want any of the lower gain modifications of the TR version, just more mid range.

Image
EmmG
 
Posts: 16
Joined: 11 Nov 2012, 03:03
Has thanked: 4 times
Have thanks: 3 times

Re: Amptweaker - Tight Metal

Postby dave_b » 01 Dec 2016, 06:21

Hi everyone. I've read through this thread and while I saw plenty of artwork, I was hoping there would be an Eagle layout to share. Anyone? I'd like to send this sucker to Oshpark since my PCB efforts tend to rust everything around me. Since they have a 3-board minimum, I would most likely have a spare board if someone needed it.
"I think being funny is not anyone's first choice" - Woody Allen
User avatar
dave_b
Breadboard Brother
 
Posts: 68
Joined: 17 Aug 2007, 22:43
Has thanked: 4 times
Have thanks: 1 time

Re: Amptweaker - Tight Metal

Postby mwelch55 » 02 Dec 2016, 20:07

I have heard it mentioned in this forum that you can build the Tight Metal and Tight Rock from the same layout, but with different component values. Does anyone have the component values of the tight rock (or a schematic with values)?

Mike
mwelch55
 
Posts: 4
Joined: 21 Jan 2012, 21:45
Location: Washington State, USA
Has thanked: 0 time
Have thanks: 0 time

Re: Amptweaker - Tight Metal

Postby dave_b » 07 Dec 2016, 18:44

mwelch55 wrote:I have heard it mentioned in this forum that you can build the Tight Metal and Tight Rock from the same layout, but with different component values. Does anyone have the component values of the tight rock (or a schematic with values)?

Mike

Hey Mike, have a look at J0K3RX's post here:
viewtopic.php?f=7&p=235354#p236432
"I think being funny is not anyone's first choice" - Woody Allen
User avatar
dave_b
Breadboard Brother
 
Posts: 68
Joined: 17 Aug 2007, 22:43
Has thanked: 4 times
Have thanks: 1 time

Re: Amptweaker - Tight Metal

Postby dave_b » 07 Dec 2016, 18:49

dave_b wrote:Hi everyone. I've read through this thread and while I saw plenty of artwork, I was hoping there would be an Eagle layout to share. Anyone? I'd like to send this sucker to Oshpark since my PCB efforts tend to rust everything around me. Since they have a 3-board minimum, I would most likely have a spare board if someone needed it.

Nevermind, I missed the fact that J0K3RX posted his DipTrace file. Thanks man! :-)
"I think being funny is not anyone's first choice" - Woody Allen
User avatar
dave_b
Breadboard Brother
 
Posts: 68
Joined: 17 Aug 2007, 22:43
Has thanked: 4 times
Have thanks: 1 time

Re: Amptweaker - Tight Metal

Postby J0K3RX » 10 Dec 2016, 01:45

mwelch55 wrote:I have heard it mentioned in this forum that you can build the Tight Metal and Tight Rock from the same layout, but with different component values. Does anyone have the component values of the tight rock (or a schematic with values)?

Mike


Look 2 posts above your post.. There you will find your answer :wink:
User avatar
J0K3RX
Degoop Doctor
 
Posts: 899
Joined: 29 Jun 2011, 02:25
Location: US Florida
Has thanked: 247 times
Have thanks: 344 times

Re: Amptweaker - Tight Metal

Postby J0K3RX » 10 Dec 2016, 04:04

dave_b wrote:
dave_b wrote:Hi everyone. I've read through this thread and while I saw plenty of artwork, I was hoping there would be an Eagle layout to share. Anyone? I'd like to send this sucker to Oshpark since my PCB efforts tend to rust everything around me. Since they have a 3-board minimum, I would most likely have a spare board if someone needed it.

Nevermind, I missed the fact that J0K3RX posted his DipTrace file. Thanks man! :-)


Yeah, sorry man.. I've been busy lately and didn't check fsb to see if there was any activity. Been kinda dry around here lately as far as any high gainers go so, I kinda shifted my attention elseware. I really wanted to get a (correct) schematic for the Friedman BE-OD pedal but, it kinda died off and went into guess/speculation mode.. Hopefully somebody will get hold of one of the pedals again so we can connect the dots/fill in the blanks..
User avatar
J0K3RX
Degoop Doctor
 
Posts: 899
Joined: 29 Jun 2011, 02:25
Location: US Florida
Has thanked: 247 times
Have thanks: 344 times

Re: Amptweaker - Tight Metal

Postby ilshat » 09 Jan 2017, 18:49

J0K3R!
Great stuiff and great your work.
I've been doing on your circuit on layout brejna
And now I think how to fit into the housing DOD Death Metal. Sorry for my English :oops:
ilshat
 
Posts: 1
Joined: 09 Mar 2011, 15:10
Has thanked: 13 times
Have thanks: 0 time

Previous

Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: Belanger88, Iconnu, rockola and 4 guests