Wampler - Triple Wreck [traced]
- MullisMan
- Breadboard Brother
Information
- Posts: 128
- Joined: 23 Feb 2010, 05:22
- my favorite amplifier: Dr. Z Maz 18 Jr.
- Completed builds: Timmy, Klon, Zendrive, King of Tone, Rat, BSIAB2, Riot!, Fuzz Factory, Coloursound Overdriver, Divided by 13 Joyride, 70 Fuzz, BBE Sonic Stomp, Big Muff PI, Xotic EP Booster, Lovepedal Eternity, Jack Orman Minibooster, Dynacomp/Ross/Keeley Compressor, SHO
- Location: NC
- Has thanked: 4 times
- Been thanked: 55 times
Just finished my build last night, pedal is working and sounds great. No squealing with my build. The eq controls give some pretty interesting sounds, although the Cream circuit doesn't blow me away when it's engaged with the distortion side. Overall though, a fun build.
I want to build it all.
- quaternotetriplet
- Resistor Ronker
will try to fit my build to a mxr size pedal..
hope i can squish its pcb to smaller size without having problem with oscillation and rfis
hope i can squish its pcb to smaller size without having problem with oscillation and rfis
- MullisMan
- Breadboard Brother
Information
- Posts: 128
- Joined: 23 Feb 2010, 05:22
- my favorite amplifier: Dr. Z Maz 18 Jr.
- Completed builds: Timmy, Klon, Zendrive, King of Tone, Rat, BSIAB2, Riot!, Fuzz Factory, Coloursound Overdriver, Divided by 13 Joyride, 70 Fuzz, BBE Sonic Stomp, Big Muff PI, Xotic EP Booster, Lovepedal Eternity, Jack Orman Minibooster, Dynacomp/Ross/Keeley Compressor, SHO
- Location: NC
- Has thanked: 4 times
- Been thanked: 55 times
If you manage to do this please post some pics of the gutsquaternotetriplet wrote:will try to fit my build to a mxr size pedal..
hope i can squish its pcb to smaller size without having problem with oscillation and rfis
I had a hard time getting everything to fit in the 1590BB.
I want to build it all.
- quaternotetriplet
- Resistor Ronker
squishing it to 2x.2.3" board..MullisMan wrote:If you manage to do this please post some pics of the gutsquaternotetriplet wrote:will try to fit my build to a mxr size pedal..
hope i can squish its pcb to smaller size without having problem with oscillation and rfis
I had a hard time getting everything to fit in the 1590BB.
- quaternotetriplet
- Resistor Ronker
here is the 2.1x 2.3 inch board i have drawn.. dont want to show the top view is so ugly with those crazy jumpers.. will box it tomorrow
quaternotetriplet wrote:here is the 2.1x 2.3 inch board i have drawn.. dont want to show the top view is so ugly with those crazy jumpers.. will box it tomorrow
aw, those traces are thin! do you not get into trouble with traces thin as that, like traces flaking off? because im scared as hell
nice job there Qnote!
nice job there Qnote!
signatures are for the weak.
FiveseveN wrote:Are Asian electrons inferior to American electrons?considering the low quality of the transistors and caps
- quaternotetriplet
- Resistor Ronker
those two traces man?Mugshot wrote:aw, those traces are thin! do you not get into trouble with traces thin as that, like traces flaking off? because im scared as hell
nice job there Qnote!
Hello,
One question; based from the comment in the Vero layout: "watch for cuts under R4, R15, R24". Does this mean that there shall be cuts in those places, or absolutely not? Maybe a dumb question, but I'm completely new to pedal building (learning by reading, then by doing)
Thank you for a nice layout
One question; based from the comment in the Vero layout: "watch for cuts under R4, R15, R24". Does this mean that there shall be cuts in those places, or absolutely not? Maybe a dumb question, but I'm completely new to pedal building (learning by reading, then by doing)
Thank you for a nice layout
Forget it, I misiunderstood. I see now that R4, R15, R24 stands for the resistors, not the location on the board :pbonsaxen wrote:Hello,
One question; based from the comment in the Vero layout: "watch for cuts under R4, R15, R24". Does this mean that there shall be cuts in those places, or absolutely not? Maybe a dumb question, but I'm completely new to pedal building (learning by reading, then by doing)
Thank you for a nice layout
- audioguy
- Resistor Ronker
I dig small tight builds... would love to see the flip side and maybe the layout if you want to share...quaternotetriplet wrote:here is the 2.1x 2.3 inch board i have drawn.. dont want to show the top view is so ugly with those crazy jumpers.. will box it tomorrow
I'm etching a batch this weekend- this baby is FO SHO gonna get built.
not only those two traces man (thin! hence your use of pre-sensitized board), but the whole board itself with those thin traces. good job!quaternotetriplet wrote:those two traces man?Mugshot wrote:aw, those traces are thin! do you not get into trouble with traces thin as that, like traces flaking off? because im scared as hell
nice job there Qnote!
signatures are for the weak.
FiveseveN wrote:Are Asian electrons inferior to American electrons?considering the low quality of the transistors and caps
- quaternotetriplet
- Resistor Ronker
yep,, im not that worried about thin traces.. the traces are solid IMO.. presensitized method works like a charm.Mugshot wrote:not only those two traces man (thin! hence your use of pre-sensitized board), but the whole board itself with those thin traces. good job!quaternotetriplet wrote:those two traces man?Mugshot wrote:aw, those traces are thin! do you not get into trouble with traces thin as that, like traces flaking off? because im scared as hell
nice job there Qnote!
- jmwreck
- Breadboard Brother
quaternotetriplet wrote:here is the 2.1x 2.3 inch board i have drawn.. dont want to show the top view is so ugly with those crazy jumpers.. will box it tomorrow
pre, how is the sound of your build?
good job
- quaternotetriplet
- Resistor Ronker
thanks brother,jmwreck wrote:quaternotetriplet wrote:here is the 2.1x 2.3 inch board i have drawn.. dont want to show the top view is so ugly with those crazy jumpers.. will box it tomorrow
pre, how is the sound of your build?
good job
actually surprised me how it came.. i just did a substitution i dont have 1uf metalized cap so i used 2 1uf electo connecting their negative sides.. it sounded great. the eq is really the best part. you can dial scooped to mid heavy marshall esque sound.
- joeboo88
- Resistor Ronker
I just built this and it sounds almost as good as the youtube videos. (I only have single coils)
I didnt do the boost section as someone said they werent to jazzed about it, and from the youtubes, it doesnt seem to do too much. The Diablo boost sounds really good, maybe i'll try and adapt that.
I used 5532's as i didnt have any 4580's, sounds nice and brighter than the jrc4558's i tried first. Thanks again Hewie for the vero.
I didnt do the boost section as someone said they werent to jazzed about it, and from the youtubes, it doesnt seem to do too much. The Diablo boost sounds really good, maybe i'll try and adapt that.
I used 5532's as i didnt have any 4580's, sounds nice and brighter than the jrc4558's i tried first. Thanks again Hewie for the vero.
Ebay is a fucker ~ Sinner - If this is something unique, then I'm a teletubbie ~also Sinner
- quaternotetriplet
- Resistor Ronker
here is my build.. i struggled a bit boxing it up...
- jmwreck
- Breadboard Brother
congrats pre, nice build, sure thats tight. I haven't done any pedals as of now (wala ako sa pinas) but im trying to make it in a couple of months (madali lang ba to??) Did you use the 4580? How about the response of each frequencies?quaternotetriplet wrote:
here is my build.. i struggled a bit boxing it up...
- quaternotetriplet
- Resistor Ronker
tonestack is the best part.. ( maganda talaga).. i used tl072.. increased the filter cap to 220u. not noisy at all.jmwreck wrote:congrats pre, nice build, sure thats tight. I haven't done any pedals as of now (wala ako sa pinas) but im trying to make it in a couple of months (madali lang ba to??) Did you use the 4580? How about the response of each frequencies?quaternotetriplet wrote:
here is my build.. i struggled a bit boxing it up...
easy build.. making the art a little bit challenging.
oh well, it's a proven and tested EQ circuit anyway
signatures are for the weak.
FiveseveN wrote:Are Asian electrons inferior to American electrons?considering the low quality of the transistors and caps