Earthquaker Devices - Monarch revision 2 - 2011 [gut shot]
- storyboardist
- Breadboard Brother
Information
Sorry to resurrect a old thread, but I made a PCB/perf layout with on board pots if anyone is interested.
- storyboardist
- Breadboard Brother
Information
My layout from the post above is now verified.
Sounds really good. Almost transparent at lower gain settings when pushing a clean amp.
Sounds really good. Almost transparent at lower gain settings when pushing a clean amp.
- Gila_Crisis
- Resistor Ronker
Information
I?ve built this using this layout:
http://tagboardeffects.blogspot.com/201 ... drive.html
sounds good, but when I crank the Treble to max, it acts like as if the circuit is overloading: from overdrive it becomes a fuzzy broken radio sound, which then fades. But as soon as I turn down treble and gain then it works again properly.
Do anybody else experienced this issue?
http://tagboardeffects.blogspot.com/201 ... drive.html
sounds good, but when I crank the Treble to max, it acts like as if the circuit is overloading: from overdrive it becomes a fuzzy broken radio sound, which then fades. But as soon as I turn down treble and gain then it works again properly.
Do anybody else experienced this issue?
Zwischen Ordnung und Chaos fangt die Musik an
- Gila_Crisis
- Resistor Ronker
Information
I'v solved the problem by putting a 150k resistor between lug3 of the Treble pot and the 1nF cap.
Now with all the pots cranked it won't "collapse".
Now with all the pots cranked it won't "collapse".
Zwischen Ordnung und Chaos fangt die Musik an