Home Brew Electronics - Detox EQ
I'd love to see that too! Mind, I'd love the schem for his Fuzz Universe pedal too mind, I can't easily get one in this country without paying a lot extra on the retail price!
Information
- Posts: 34
- Joined: 06 Mar 2012, 02:54
- my favorite amplifier: Orange
- Completed builds: Keeley Katana Boost
Skreddy Pink Flesh
Cornish LD-1
Silicon Fuzz Face
Dam Meathead
Zvex Woolly Mammoth
Zvex Hard On
Lovepedal Plexi 800
Hornby Skewes Treble Booster
Fulltone Fatboost
Xotic EP Booster
GGG Neovibe
HAO Rust Driver - Has thanked: 7 times
- Been thanked: 13 times
- Cub
- Cap Cooler
I like the idea of this pedal, adding a clean channel to a dirty amp. But there are more roads that lead to Rome and I recently came across the video below. In 2012, Paul himself used a compressor to clean up a dirty Marshall instead of his signature HBE pedal. He still may do that, who knows.
So while we wait for a Detox EQ to come along for tracing, perhaps you can have some fun with a compressor.
The bit about the compressor starts at 6:52 minutes.
So while we wait for a Detox EQ to come along for tracing, perhaps you can have some fun with a compressor.
The bit about the compressor starts at 6:52 minutes.
I wish I were a chestnut tree, nourished by the sun.
With twigs and leaves and branches and conkers by the ton.
With twigs and leaves and branches and conkers by the ton.
Information
- Posts: 34
- Joined: 06 Mar 2012, 02:54
- my favorite amplifier: Orange
- Completed builds: Keeley Katana Boost
Skreddy Pink Flesh
Cornish LD-1
Silicon Fuzz Face
Dam Meathead
Zvex Woolly Mammoth
Zvex Hard On
Lovepedal Plexi 800
Hornby Skewes Treble Booster
Fulltone Fatboost
Xotic EP Booster
GGG Neovibe
HAO Rust Driver - Has thanked: 7 times
- Been thanked: 13 times
Actually, I use a volume pedal with a treble bleed inside. Works well with my Orange amp but it's somewhat limited with the EQ, especially, switching between guitars and pickups.
The idea of the compressor is good but I can't do it with my Diamond Compressor clone
The idea of the compressor is good but I can't do it with my Diamond Compressor clone
Information
- Posts: 34
- Joined: 06 Mar 2012, 02:54
- my favorite amplifier: Orange
- Completed builds: Keeley Katana Boost
Skreddy Pink Flesh
Cornish LD-1
Silicon Fuzz Face
Dam Meathead
Zvex Woolly Mammoth
Zvex Hard On
Lovepedal Plexi 800
Hornby Skewes Treble Booster
Fulltone Fatboost
Xotic EP Booster
GGG Neovibe
HAO Rust Driver - Has thanked: 7 times
- Been thanked: 13 times
Good news! I have the original. Some photos on the new topic: https://www.freestompboxes.org/viewtopic ... 33&t=27633
- Cub
- Cap Cooler
Our man Bugg has been at it again!
https://www.pedalpcb.com/product/coldturkey/
https://www.pedalpcb.com/product/coldturkey/
I wish I were a chestnut tree, nourished by the sun.
With twigs and leaves and branches and conkers by the ton.
With twigs and leaves and branches and conkers by the ton.
- Cub
- Cap Cooler
If you'd rather go with perf or make your own PCB, the good people over at effectslayouts blog got you covered.Cub wrote:Our man Bugg has been at it again!
https://www.pedalpcb.com/product/coldturkey/
http://effectslayouts.blogspot.com/2019 ... ox-eq.html
I wish I were a chestnut tree, nourished by the sun.
With twigs and leaves and branches and conkers by the ton.
With twigs and leaves and branches and conkers by the ton.
- alexradium
- Resistor Ronker
OMG,why is a textbook 3 band eq so special?