Solo Dallas - SVDS Replica [traced]
total recup sorry for the look with big caps
i have no buy conponent to do the proto ^^
i have no buy conponent to do the proto ^^
Information
That is a lot of MOJO in there
Does it sound good?
Does it sound good?
sound cool
the last pic ^^
i have do a mod from the patrice schematic i think there is a little error , i wait for confirmation
the last pic ^^
i have do a mod from the patrice schematic i think there is a little error , i wait for confirmation
- apollomusicservice
- Resistor Ronker
Information
My first proto boards are on the desk. Will see, my one layer design is suitable for 1590B enclosure.
apollomusicservice on your schematic i see c14 reversed
look good ^^
look good ^^
- apollomusicservice
- Resistor Ronker
Information
boby6kiler thanks, here is version 1.1 with some corrections.
- EddieTavares
- Breadboard Brother
arngus
This capacitor seems to exist just in the older units and it is used to avoid radio interferentes, try a small ceramic cap about 100p if you want but it is not too necessary.
This capacitor seems to exist just in the older units and it is used to avoid radio interferentes, try a small ceramic cap about 100p if you want but it is not too necessary.
i am trying to implant the snap option not esay just with pics ^^
like the last tower or storm rev 2
like the last tower or storm rev 2
- EddieTavares
- Breadboard Brother
There is a rc filter immediately after the expander r10 and c15 considering the apollomusicservice schematic, it cam be converted in a rat tone control if you replace the r10 with a potentiometer and/or a resistor appropriated. I believe 10k pot should work.boby6kiler wrote:i am trying to implant the snap option not esay just with pics ^^
like the last tower or storm rev 2
ok but i want to buil the trick like the original with the nsl32
if someone want help we can work by email
if someone want help we can work by email
hello lovetone , i have good result with your values it seem to be ok for me
i wait the good ic to confirm
i wait the good ic to confirm
hey boby6kiler, did the vero layout you posted work? And do you have the layout for the 12V section that you used externally? Would love to put this together if you've got it workingboby6kiler wrote:hello lovetone , i have good result with your values it seem to be ok for me
i wait the good ic to confirm
i ll have to do a little modification of this layout , there is an error on schematic , i have receive my ic from mousser i will take my mesurement today
i don t have the original so i can t tell you if it ok 100/100
i don t have the original so i can t tell you if it ok 100/100
- apollomusicservice
- Resistor Ronker
Information
Work in progress.
- andregarcia57
- Cap Cooler
thanks!apollomusicservice wrote:boby6kiler thanks, here is version 1.1 with some corrections.
i see a 10kb pot instead of the 1kb why
i will wait for your result before building my other proto
for this revision i think the 15k you have in ic1 is at 10k ( the 2 values work )
using ne570 or sa571 ? ( think the 570 need the 8k2 resistor ) i don't have try without this
thanks nesha
i will wait for your result before building my other proto
for this revision i think the 15k you have in ic1 is at 10k ( the 2 values work )
using ne570 or sa571 ? ( think the 570 need the 8k2 resistor ) i don't have try without this
thanks nesha
Hi guys
My box is not a Schaffer Replica clone, but it works the same way.https://www.facebook.com/mr.tyr.booster/
My box is not a Schaffer Replica clone, but it works the same way.https://www.facebook.com/mr.tyr.booster/