Solo Dallas - SVDS Replica

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Re: Solo Dallas - SVDS Replica

Postby boby6kiler » 24 Mar 2018, 09:00

i see a 10kb pot instead of the 1kb why :?:
i will wait for your result before building my other proto
for this revision i think the 15k you have in ic1 is at 10k ( the 2 values work )
using ne570 or sa571 ? ( think the 570 need the 8k2 resistor ) i don't have try without this
thanks nesha :applause:
boby6kiler
 
Posts: 35
Joined: 24 Feb 2014, 10:04
Has thanked: 6 times
Have thanks: 9 times

Re: Solo Dallas - SVDS Replica

Postby Mr.TYR » 25 Mar 2018, 13:45

Hi guys
My box is not a Schaffer Replica clone, but it works the same way.https://www.facebook.com/mr.tyr.booster/
Image
Image
Mr.TYR
 
Posts: 3
Joined: 14 Mar 2018, 12:20
Has thanked: 0 time
Have thanks: 0 time

Re: Solo Dallas - SVDS Replica

Postby Mr.TYR » 25 Mar 2018, 16:33

My device is with an optical limiter , dynamic noise gate, buffered bypass and pre / de emphasis. ICs are 2x TL072 and SA571.The function corresponds to the TSR Tower.
Mr.TYR
 
Posts: 3
Joined: 14 Mar 2018, 12:20
Has thanked: 0 time
Have thanks: 0 time

Re: Solo Dallas - SVDS Replica

Postby EddieTavares » 26 Mar 2018, 13:29

Mr.TYR

What do you intend to do? Sell your gadget or share information?
User avatar
EddieTavares
Breadboard Brother
 
Posts: 90
Joined: 12 Jan 2010, 14:43
Has thanked: 3 times
Have thanks: 13 times

Re: Solo Dallas - SVDS Replica

Postby Mr.TYR » 26 Mar 2018, 15:55

EddieTavares wrote:Mr.TYR

What do you intend to do? Sell your gadget or share information?

Selling. However, I can provide information on pre/ de emphasis, for TSR very important.
Mr.TYR
 
Posts: 3
Joined: 14 Mar 2018, 12:20
Has thanked: 0 time
Have thanks: 0 time

Re: Solo Dallas - SVDS Replica

Postby boby6kiler » 13 Apr 2018, 17:53

my last proto :
Image
for the rev3 like my prototype the " diode" 43a 48a is the key , i don't have fond a good alternative at the moment but i try ^^
i have used Schottky diode like mbr 150 and 1n5817 to try it seem to work but not perfect at the moment
maybe a zener + a schottky diode lol
i will test to find that

For this message the author boby6kiler has received thanks: 2
HENK (14 Apr 2018, 11:32), nkay24 (15 Apr 2018, 16:36)
boby6kiler
 
Posts: 35
Joined: 24 Feb 2014, 10:04
Has thanked: 6 times
Have thanks: 9 times

Re: Solo Dallas - SVDS Replica

Postby boby6kiler » 15 May 2018, 09:14

there is the work of patrice and me :D
tsr rev 3

traces :
Image
Image

last schematic:
Image

last layout :
Image

last components list:
Image

at the moment i don t have the good equivalent to the coponent d3 :-(

what do you think ?

pic of d3 :
Image
boby6kiler
 
Posts: 35
Joined: 24 Feb 2014, 10:04
Has thanked: 6 times
Have thanks: 9 times

Re: Solo Dallas - SVDS Replica

Postby boby6kiler » 15 May 2018, 09:49

inside my proto :
Image

Image

Image
boby6kiler
 
Posts: 35
Joined: 24 Feb 2014, 10:04
Has thanked: 6 times
Have thanks: 9 times

Re: Solo Dallas - SVDS Replica

Postby triplesevener » 09 Jul 2018, 08:30

I don't think 10nF is right for C7. That creates a lowpass filter and completely destroys the pre-emphasis. I think 100pF is right.
triplesevener
 
Posts: 43
Joined: 28 Mar 2012, 15:00
Location: MA, US
Has thanked: 7 times
Have thanks: 7 times

Re: Solo Dallas - SVDS Replica

Postby nkay24 » 13 Jul 2018, 07:40

i've built this with boby6kiler's latest layout, changing c7 to 100pf as triplesevener suggusted, it does work and sound good, but im also stuck on the D3 diode. There is a bit of hiss in the sound without the D3 diode connected, i've tried a few diodes that i have on hand, no difference with 1n4148, 1n4742, 1n4749, 1n4004, 1n5817, sr560. I did have partial success with a 1n4739, but it heats up and blows within about 20 seconds, but it does remove the hiss and work properly temporarily. I tried running it on 9v and it is hiss free without D3 in the circuit, its a bit more compressed than running at 12v but still very usable. I've got 1n4761 on order so ill try one of those when they arrive. Anyone have any ideas on the value of the D3 diode?
nkay24
 
Posts: 2
Joined: 25 Jan 2017, 15:14
Has thanked: 3 times
Have thanks: 0 time

Re: Solo Dallas - SVDS Replica

Postby marshmellow » 13 Jul 2018, 08:56

Leave it out. That power supply section drawing is a mess. If it's a standard silicon or schottky diode, it doesn't do anything. If it is a zener, then the 10R resistor is definitely wrong. I don't see any reason why the supply voltage should be dropped at that point. It will run fine on 9V or 12V.
marshmellow
Resistor Ronker
 
Posts: 431
Joined: 16 Aug 2007, 08:31
Location: Germany
Has thanked: 13 times
Have thanks: 114 times

Re: Solo Dallas - SVDS Replica

Postby EddieTavares » 14 Jul 2018, 01:37

nkay24, marshmellow

The ps section emulates the same voltages as the transmitter (9v battery supply) and the the receiver (12v internal ps), however, they could not simulate the first NE570 half at 9v and the other half at 12v... Probably it does not affect the final result.

For this message the author EddieTavares has received thanks:
nkay24 (14 Jul 2018, 04:38)
User avatar
EddieTavares
Breadboard Brother
 
Posts: 90
Joined: 12 Jan 2010, 14:43
Has thanked: 3 times
Have thanks: 13 times

Re: Solo Dallas - SVDS Replica

Postby boby6kiler » 14 Jul 2018, 04:59

i have do the same work in rev 2 with pics and infos
if someone want to work on it tell me i can post here
the rev 2 sound good ,more bassy then my proto of rev3

i have send all to apollo long time ago to try but no news :-(

we need just 4 ou 5 values of component all the rest is verified
boby6kiler
 
Posts: 35
Joined: 24 Feb 2014, 10:04
Has thanked: 6 times
Have thanks: 9 times

Previous

Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: astrondelta, vot and 24 guests