Solo Dallas - SVDS Replica  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
User avatar
patricef
Information
Posts: 9
Joined: 27 Jun 2011, 17:30
Has thanked: 2 times
Been thanked: 14 times

Post by patricef »

Some update: on my schematic, R14 should be removed. D3 value is 43A48A.
Voltage, 0V taken from input jack ring:
VCC: 12.09V
IC1 pins:
1: 5.81V
2: 5.82V
3: 5.73V
5: 3.64V
6: 0V
7: 3.64V
8: 11.58V

IC2 pins:
1: 0.95V
2.:1.79V
3: 1.79V
5: 1.80V
6: 1.79V
10: 7.24V
11: 7.24V
12: 1.80V
13: 11.58V
14: 1.80V
15: 1.79V
16: 0.78V

IC3 pins:
1,2,3: 0V
6: 5.06V
7: 11.73V
8: 11:87V

User avatar
EddieTavares
Breadboard Brother
Information
Posts: 126
Joined: 12 Jan 2010, 13:43
my favorite amplifier: marshall
Has thanked: 9 times
Been thanked: 26 times

Post by EddieTavares »

patricef great Job!!!

:applause: :applause: :applause:

User avatar
apollomusicservice
Resistor Ronker
Information
Posts: 338
Joined: 04 Jun 2012, 11:54
Has thanked: 65 times
Been thanked: 828 times
Contact:

Post by apollomusicservice »

patricef wrote:Some update: on my schematic, R14 should be removed. D3 value is 43A48A.
Voltage, 0V taken from input jack ring:
VCC: 12.09V
IC1 pins:
1: 5.81V
2: 5.82V
3: 5.73V
5: 3.64V
6: 0V
7: 3.64V
8: 11.58V
Values at pin 6 and 7 on IC1 can't be different.

User avatar
patricef
Information
Posts: 9
Joined: 27 Jun 2011, 17:30
Has thanked: 2 times
Been thanked: 14 times

Post by patricef »

apollomusicservice wrote:
patricef wrote:Some update: on my schematic, R14 should be removed. D3 value is 43A48A.
Voltage, 0V taken from input jack ring:
VCC: 12.09V
IC1 pins:
1: 5.81V
2: 5.82V
3: 5.73V
5: 3.64V
6: 3.64V
7: 3.64V
8: 11.58V
Values at pin 6 and 7 on IC1 can't be different.
My mistake, I rechecked again pin 6 and 7 are indeed at the same voltage.

User avatar
patricef
Information
Posts: 9
Joined: 27 Jun 2011, 17:30
Has thanked: 2 times
Been thanked: 14 times

Post by patricef »

boby6kiler has been working hard on tracing and verifying the circuit. I'll post an updated version of the schematic soon, stay tuned !

User avatar
boby6kiler
Information
Posts: 44
Joined: 24 Feb 2014, 09:04
Has thanked: 6 times
Been thanked: 9 times

Post by boby6kiler »

:popcorn: :applause:
thanks patrice for this one

User avatar
patricef
Information
Posts: 9
Joined: 27 Jun 2011, 17:30
Has thanked: 2 times
Been thanked: 14 times

Post by patricef »

Attached the latest schematic. Enjoy !
Attachments
TSR
TSR

User avatar
boby6kiler
Information
Posts: 44
Joined: 24 Feb 2014, 09:04
Has thanked: 6 times
Been thanked: 9 times

Post by boby6kiler »

nice schematic patrice :D

i don't find a good alternative to this :
Image

any idea ?

User avatar
EddieTavares
Breadboard Brother
Information
Posts: 126
Joined: 12 Jan 2010, 13:43
my favorite amplifier: marshall
Has thanked: 9 times
Been thanked: 26 times

Post by EddieTavares »

It looks like a diode, propably a 1n4148 smd version.

User avatar
boby6kiler
Information
Posts: 44
Joined: 24 Feb 2014, 09:04
Has thanked: 6 times
Been thanked: 9 times

Post by boby6kiler »

patricef mesure 0.246V with the multimeter in diode mode

User avatar
EddieTavares
Breadboard Brother
Information
Posts: 126
Joined: 12 Jan 2010, 13:43
my favorite amplifier: marshall
Has thanked: 9 times
Been thanked: 26 times

Post by EddieTavares »

This is the D5 in the patricief's schematic if I am correct. It looks like a reverse flow protection, I don't believe that it makes any tonal difference...

I believe that the sollo dalas guys tried to reproduce in the pedal every single component present in the original Shaeffer gadget, Why they implement R9, R15 and R17 all 8k2 resistors simply dropping a litle voltage?

User avatar
RiGLEY
Information
Posts: 32
Joined: 08 Sep 2007, 10:43
Location: Budapest, Hungary
Has thanked: 1 time
Contact:

Post by RiGLEY »

boby6kiler wrote:nice schematic patrice :D

i don't find a good alternative to this :
[ Image ]

any idea ?
Yeah, it looks like a diode by Vishay. Can't find anything specific by searching 43A 48A.

User avatar
GeoffroyLux
Information
Posts: 14
Joined: 05 May 2016, 11:32
Location: Luxembourg
Has thanked: 2 times
Been thanked: 3 times

Post by GeoffroyLux »

1N4348 ? Smd SOD-123 size ?
But I didn't find anything
Sorry for my English ^_^

User avatar
lovetone
Information
Posts: 19
Joined: 13 Nov 2009, 12:20
Been thanked: 8 times

Post by lovetone »

Hi, I drew this up a while ago and forgot all about it its very close to the schematic drawn by apollomusicservice with slight differences.

At the time I removed some of the surface mount capacitors to check the values so some on this drawing are low values but thats what I measured at the time.

This may help with some of the missing values.

Sorry for the drawing but I don't have a drawing programme.
Attachments
Solo Dallas .pdf
(750.85 KiB) Downloaded 400 times

User avatar
boby6kiler
Information
Posts: 44
Joined: 24 Feb 2014, 09:04
Has thanked: 6 times
Been thanked: 9 times

Post by boby6kiler »

-the 10nf in ic1 pin 2/1 verified with multimeter removed from the board?
-the 1nf in the area of 8,2k/2,2k verified with multimeter removed from the board?
-the 16pf in ic3 pin 3/6 verified with multimeter removed from the board?
thanks

User avatar
lovetone
Information
Posts: 19
Joined: 13 Nov 2009, 12:20
Been thanked: 8 times

Post by lovetone »

boby6kiler wrote:-the 10nf in ic1 pin 2/1 verified with multimeter removed from the board?
-the 1nf in the area of 8,2k/2,2k verified with multimeter removed from the board?
-the 16pf in ic3 pin 3/6 verified with multimeter removed from the board?
thanks
Yes as far as I can remember if I could not measure the capacitor in the board then I removed it.

User avatar
boby6kiler
Information
Posts: 44
Joined: 24 Feb 2014, 09:04
Has thanked: 6 times
Been thanked: 9 times

Post by boby6kiler »

thanks i will try this values

User avatar
boby6kiler
Information
Posts: 44
Joined: 24 Feb 2014, 09:04
Has thanked: 6 times
Been thanked: 9 times

Post by boby6kiler »

the circuit work with lovetone values :applause:

User avatar
boby6kiler
Information
Posts: 44
Joined: 24 Feb 2014, 09:04
Has thanked: 6 times
Been thanked: 9 times

Post by boby6kiler »

my proto :D

http://nsm07.casimages.com/img/2018/02/ ... 549832.jpg
http://nsm07.casimages.com/img/2018/02/ ... 549834.jpg

i don't know if the ic are ok or fake i don t have the exact voltage but i will try the ic like the original tsr to compare .
but seem to work
at the moment i have the 4,7nf but i will put the 1nf to try

User avatar
patricef
Information
Posts: 9
Joined: 27 Jun 2011, 17:30
Has thanked: 2 times
Been thanked: 14 times

Post by patricef »

boby6kiler wrote:my proto :D

http://nsm07.casimages.com/img/2018/02/ ... 549832.jpg
http://nsm07.casimages.com/img/2018/02/ ... 549834.jpg

i don't know if the ic are ok or fake i don t have the exact voltage but i will try the ic like the original tsr to compare .
but seem to work
at the moment i have the 4,7nf but i will put the 1nf to try
:shock:
Vintage passive components and even vintage wire !

Post Reply