freestompboxes.org

tracing pedals since 2007

Skip to content

Bearfoot - Baby Pink Booster  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post a reply

Bearfoot - Baby Pink Booster  [traced]

Postby mmolteratx » 20 Mar 2013, 06:02

Image
Image
You do not have the required permissions to view the files attached to this post.
For this message the author mmolteratx has received thanks: 7
atreidesheir (02 Apr 2013, 02:14), IvIark (20 Mar 2013, 16:21), mac_2006 (20 Mar 2013, 13:27), modman (20 Mar 2013, 17:28), pedalgrinder (24 Mar 2013, 11:33), rocklander (20 Mar 2013, 07:06), tp801 (21 Mar 2013, 17:44)
mmolteratx
Degoop Doctor
 
Posts: 510
Joined: 19 Dec 2009, 02:50
Has thanked: 103 times
Have thanks: 625 times
Top

Re: Bearfoot Baby Pink Booster

Postby skywise » 20 Mar 2013, 16:02

That unnecessarily huge cap must be where all the awesome is stored. :thumbsup
skywise
Breadboard Brother
 
Posts: 79
Joined: 23 Dec 2011, 06:09
Has thanked: 47 times
Have thanks: 20 times
Top

Re: Bearfoot Baby Pink Booster

Postby IvIark » 20 Mar 2013, 17:02

Love the quickies :)

Image
"If anyone is a 'genius' for putting jacks in such a pedal in the only spot where they could physically fit, then I assume I too am a genius for correctly inserting my legs into my pants this morning." - candletears7 - TGP
For this message the author IvIark has received thanks: 3
modman (08 May 2015, 12:14), pedalgrinder (24 Mar 2013, 11:34), rocklander (20 Mar 2013, 20:25)
User avatar
IvIark
Tube Twister
 
Posts: 2297
Joined: 02 Jan 2008, 00:59
Location: Manchester UK
Has thanked: 667 times
Have thanks: 678 times
Top

Re: Bearfoot Baby Pink Booster

Postby mmolteratx » 21 Mar 2013, 01:56

And here's a PCB. Parts match the schem, and I don't think I need to say no commercial use, but no commercial use. Print at 300dpi.
You do not have the required permissions to view the files attached to this post.
For this message the author mmolteratx has received thanks: 3
modman (08 May 2015, 12:14), pedalgrinder (24 Mar 2013, 11:34), rocklander (21 Mar 2013, 02:34)
mmolteratx
Degoop Doctor
 
Posts: 510
Joined: 19 Dec 2009, 02:50
Has thanked: 103 times
Have thanks: 625 times
Top

Re: Bearfoot Baby Pink Booster

Postby mmolteratx » 21 Mar 2013, 02:17

And here's one with larger pad sizes. Figured I'd make it a bit easier for less experienced etchers.
You do not have the required permissions to view the files attached to this post.
For this message the author mmolteratx has received thanks: 3
modman (08 May 2015, 12:14), pedalgrinder (24 Mar 2013, 11:34), rocklander (21 Mar 2013, 02:33)
mmolteratx
Degoop Doctor
 
Posts: 510
Joined: 19 Dec 2009, 02:50
Has thanked: 103 times
Have thanks: 625 times
Top

Re: Bearfoot Baby Pink Booster

Postby real-pcb » 21 Mar 2013, 08:51

Would above PCB be processed?
real-pcb
 
Posts: 2
Joined: 25 Jan 2013, 02:45
Has thanked: 0 time
Have thanks: 0 time
Top

Re: Bearfoot Baby Pink Booster

Postby marshmellow » 21 Mar 2013, 13:11

real-pcb wrote:Would above PCB be processed?


Would you please stop spamming the DIY electronics forums? Thank you.
marshmellow
Resistor Ronker
 
Posts: 444
Joined: 16 Aug 2007, 08:31
Location: Germany
Has thanked: 13 times
Have thanks: 117 times
Top

Re: Bearfoot Baby Pink Booster

Postby phibes » 21 Mar 2013, 16:06

real-pcb wrote:Would above PCB be processed?


No it needs to be coagulated.
GuitarlCarl - "TGP = The Gear Polishers"

Image Ken
User avatar
phibes
Transistor Tuner
 
Posts: 1107
Joined: 10 Dec 2008, 02:17
Location: United States
Has thanked: 85 times
Have thanks: 185 times
Top

Re: Bearfoot Baby Pink Booster

Postby Seiche » 21 Mar 2013, 19:38

so switch is wired so that the thing is still a buffer when it's off. For regular operation regular switch wiring, right?
User avatar
Seiche
Tube Twister
 
Posts: 2480
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 241 times
Have thanks: 181 times
Top

Re: Bearfoot Baby Pink Booster

Postby mmolteratx » 21 Mar 2013, 19:41

Seiche wrote:so switch is wired so that the thing is still a buffer when it's off. For regular operation regular switch wiring, right?


Yup. If you want to wire it as true bypass, dump the 150k resistor at the cold lug of the boost pot and leave the wiper connected to ground.
For this message the author mmolteratx has received thanks: 3
modman (08 May 2015, 12:15), pedalgrinder (24 Mar 2013, 11:34), Seiche (21 Mar 2013, 20:24)
mmolteratx
Degoop Doctor
 
Posts: 510
Joined: 19 Dec 2009, 02:50
Has thanked: 103 times
Have thanks: 625 times
Top

Re: Bearfoot Baby Pink Booster

Postby Seiche » 28 Mar 2013, 14:52

looking at the pcb again, this looks like it could be the same pcb used on the candy apple fuzz (as usual for the Bearfoots). This might be a good opportunity to trace out the pcb connections, as the traces are easily visible to facilitate tracing of the CAF once it's released.
User avatar
Seiche
Tube Twister
 
Posts: 2480
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 241 times
Have thanks: 181 times
Top

Re: Bearfoot Baby Pink Booster

Postby coldcraft » 28 Mar 2013, 18:43

people pay for this?
Black Dynamite wrote:you need to shut the fuck up when grown folks is talkin.
User avatar
coldcraft
Diode Debunker
 
Posts: 733
Joined: 11 Jul 2009, 02:00
Has thanked: 42 times
Have thanks: 83 times
Top

Re: Bearfoot Baby Pink Booster

Postby Seiche » 28 Mar 2013, 19:56

well it's pretty darn cute :mrgreen:

Image
Image
User avatar
Seiche
Tube Twister
 
Posts: 2480
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 241 times
Have thanks: 181 times
Top

Re: Bearfoot Baby Pink Booster

Postby phibes » 28 Mar 2013, 22:38

Seiche has been waiting to unload that Reese photo!
GuitarlCarl - "TGP = The Gear Polishers"

Image Ken
User avatar
phibes
Transistor Tuner
 
Posts: 1107
Joined: 10 Dec 2008, 02:17
Location: United States
Has thanked: 85 times
Have thanks: 185 times
Top

Re: Bearfoot Baby Pink Booster

Postby mmolteratx » 30 Mar 2013, 00:04

Seiche wrote:looking at the pcb again, this looks like it could be the same pcb used on the candy apple fuzz (as usual for the Bearfoots). This might be a good opportunity to trace out the pcb connections, as the traces are easily visible to facilitate tracing of the CAF once it's released.


It's used in the CAF and EGD. Was gonna buy an EGD, but I've kinda lost interest.
For this message the author mmolteratx has received thanks:
modman (08 May 2015, 12:16)
mmolteratx
Degoop Doctor
 
Posts: 510
Joined: 19 Dec 2009, 02:50
Has thanked: 103 times
Have thanks: 625 times
Top

Re: Bearfoot - Baby Pink Booster

Postby laoliang » 27 Aug 2017, 20:19

Excuse me:D1,D2,D3 is 1n4002?
As far away as China
laoliang
 
Posts: 2
Joined: 14 Aug 2017, 18:14
Has thanked: 0 time
Have thanks: 0 time
Top

Re: Bearfoot - Baby Pink Booster

Postby laoliang » 17 Sep 2017, 09:08

laoliang wrote:Excuse me:I'm ready, but no sound, I checked again and again, my triode in 5458
laoliang
 
Posts: 2
Joined: 14 Aug 2017, 18:14
Has thanked: 0 time
Have thanks: 0 time
Top

Re: Bearfoot Baby Pink Booster

Postby Seiche » 22 Jun 2018, 08:47

mmolteratx wrote:If you want to wire it as true bypass, dump the 150k resistor at the cold lug of the boost pot and leave the wiper connected to ground.

Can someone explain what is happening here? I just left the 150k in the circuit and wired the bypass as usual. What's the difference? When turned all the way down, the signal is at unity gain.

laoliang wrote:Excuse me:D1,D2,D3 is 1n4002?
As far away as China

No, D2 is a zener for LED protection, D3 is an LED. I left D2, D3 off my build as I did not use the buffered bypass.
User avatar
Seiche
Tube Twister
 
Posts: 2480
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 241 times
Have thanks: 181 times
Top
Post a reply

Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: boogie3, Fat Bob, mauzau73 and 9 guests

Powered by phpBB® Forum Software © phpBB Group
Protected by Anti-Spam ACP