Amptweaker - Tight Metal [traced]
- DimebuGG
- Solder Soldier
Information
Better late than never. Board is according to 125B type enclosures but this will fit also in 1590B/1290NS housing. Omitted the loops section though. And BTW, this layout uses 3 dual opamps. Enjoy!.
- Attachments
-
- Tight-Ass Distortion.pdf
- (55.13 KiB) Downloaded 968 times
Finch: A witty saying proves nothing - Voltaire
Stifler: Suck my dick - Ron Jeremy
Stifler: Suck my dick - Ron Jeremy
- J0K3RX
- Degoop Doctor
I downloaded the pdf but it won't open for me... seems corrupt?DimebuGG wrote:Better late than never. Board is according to 125B type enclosures but this will fit also in 1590B/1290NS housing. Omitted the loops section though. And BTW, this layout uses 3 dual opamps. Enjoy!.
- Blitz Krieg
- Breadboard Brother
worked for me
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 596 times
- Been thanked: 2061 times
and me
be kind to all animals - especially human beings
- apollomusicservice
- Resistor Ronker
Information
Try this file.I downloaded the pdf but it won't open for me... seems corrupt?
- Attachments
-
- Tight-Ass Distortion 1.pdf
- (51.66 KiB) Downloaded 704 times
- DimebuGG
- Solder Soldier
Information
Hmmm..that's odd..But hey, JOK3RX, I remember you asked me long time ago to do a smaller board layout on this circuit. Well, I hope this will do for you dude..J0K3RX wrote: I downloaded the pdf but it won't open for me... seems corrupt?
BTW, what's the correct values for R9 and R19?
Finch: A witty saying proves nothing - Voltaire
Stifler: Suck my dick - Ron Jeremy
Stifler: Suck my dick - Ron Jeremy
- J0K3RX
- Degoop Doctor
brejna wrote:What type of switch is used for pre/post loop positioning? 2p4t slide switch?
The is the exact switch, manufacturer and all..
http://www.digikey.com/product-detail/e ... -ND/251342
- DimebuGG
- Solder Soldier
Information
Built this using my layout. Aggressive heavy sharp/tight sound compared to your regular hi gain build which has a smooth/round tone. I'm using 9V supply only with two TLC2272 in the first and second stage and LF353 in the end(tried fitting a KIA4558 too which has I think a more mid-dy tone).
Finch: A witty saying proves nothing - Voltaire
Stifler: Suck my dick - Ron Jeremy
Stifler: Suck my dick - Ron Jeremy
- greenskull
- Resistor Ronker
Hey Dime! Just built this up using your layout and recommended chips...... kicks ass!
Didn't need the gate switch, because I decided to make the gate control external. Real glad you designed this for a 125-b, my favorite box.
Thanks for sharing your layout!
Didn't need the gate switch, because I decided to make the gate control external. Real glad you designed this for a 125-b, my favorite box.
Thanks for sharing your layout!
fuck smooth tone, fuck eric johnson - Seiche
- DimebuGG
- Solder Soldier
Information
Nice signature!..I love Eric though..greenskull wrote:Hey Dime! Just built this up using your layout and recommended chips...... kicks ass!
Didn't need the gate switch, because I decided to make the gate control external. Real glad you designed this for a 125-b, my favorite box.
Thanks for sharing your layout!
Finch: A witty saying proves nothing - Voltaire
Stifler: Suck my dick - Ron Jeremy
Stifler: Suck my dick - Ron Jeremy
- Pruttelherrie
- Solder Soldier
I'll just leave this here
Mostly based on/redrawn from Jok3rx's layout.
Mostly based on/redrawn from Jok3rx's layout.
- J0K3RX
- Degoop Doctor
You mean kinda like this one?Pruttelherrie wrote:I'll just leave this here
Mostly based on/redrawn from Jok3rx's layout.
Don't know about smooth and round sounding This one is pretty damn nasty! I had boards made from this one and it has even more balls than the real one I thought and played them side by side! There are little * signs on the components for the notch that make the difference between the TM and the TR. You can populate those with whatever you like...
- Attachments
-
- DRAGON_1.5.zip
- (63.21 KiB) Downloaded 690 times
Information
- Posts: 1
- Joined: 07 Jun 2012, 09:30
Hello J0K3RX ,
Is there a schematic for Booster?
Is there a schematic for Booster?
- okgb
- Diode Debunker
26 pages, nope not kidding thanks. the diode gate was something peavey has used before, he seemed
to make a big deal out of having the tight control, but the comments from builds don't make it interesting to me,
glad you pointed it out.
to make a big deal out of having the tight control, but the comments from builds don't make it interesting to me,
glad you pointed it out.