Death By Audio - Echo Dream 2

Govmnt_Lacky · Post by **Govmnt_Lacky** » 21 Jun 2013, 18:45

Whats the deal with the pot pins sticking half-way throught the back of the PCB?

Couldn't they have used the SHORTER stand-off lengths

ftelettronica · Post by **ftelettronica** » 25 Aug 2015, 10:48

where are the two 330r resistors between pin 15 and 16 of 2206P?

ftelettronica · Post by **ftelettronica** » 25 Aug 2015, 12:16

And what is the real value of the capacitor going to the central lug of the fuzz pot?
in the first draw is 221 but in the other two schematics is 224

gigelmargel · Post by **gigelmargel** » 13 Apr 2017, 20:13

ftelettronica wrote:And what is the real value of the capacitor going to the central lug of the fuzz pot?
in the first draw is 221 but in the other two schematics is 224

The cap is 220pf for sure. It's in the feedback loop of an op-amp, so 220nF is far too high. I've built it with 220nF and I had no fuzz.

jrfox92 · Post by **jrfox92** » 14 Apr 2017, 00:02

PCB says 221.

innyve89 · Post by **innyve89** » 31 Aug 2018, 10:34

If I wanted remove the fuzz and the modulation and just have the echo and the feedback, such as the Micro dream Pedal by death by audio, which parts of the circuit would I remove to do so?

BetterOffShred · Post by **BetterOffShred** » 31 Aug 2018, 18:43

Build a rebote 2.5 ..

jrfox92 · Post by **jrfox92** » 01 Sep 2018, 23:30

BetterOffShred wrote:Build a rebote 2.5 ..

+1
Most of the Echo Dream's character comes from the fuzz and modulation circuit.
If you're not sure which parts are the fuzz and modulation, you probably shouldn't try messing around with the circuit right now.

Death By Audio - Echo Dream 2 [traced]