Death By Audio - Echo Dream 2 [traced]
Information
Whats the deal with the pot pins sticking half-way throught the back of the PCB?
Couldn't they have used the SHORTER stand-off lengths
Couldn't they have used the SHORTER stand-off lengths
Information
- Posts: 30
- Joined: 20 Jun 2010, 02:11
- Completed builds: DOD 250 (GGG)
PULSAR TREMOLO tonepad
REBOTE DELAY 2.5 TONEPAD
PHASE 100 GGG
DISTORTION PLUS (GGG)
BIG MUFF ggg
SANS AMP GT2 tonepad
FUZZ FACTORY
INTERFAX HARMONIC PERCOLATOR
MXR DynaComp
MAESTRO FSH1 tonepad
ibanez tube screamer
RAT
PHASE 45
PHASE 90
MXR envelope filter
TREMULUS LUNE
Analog Man King of Tone v.4
Chorus small Clone
Wooly Mammoth
AMZ booster
ZVEX MACHINE
Weird Sound Generator
Tremolo Catalinbread Valcoder
PLEXITONE
AC-TONE
Cacophonator
Flanger Electric Mistress - Has thanked: 10 times
- Been thanked: 21 times
Information
- Posts: 30
- Joined: 20 Jun 2010, 02:11
- Completed builds: DOD 250 (GGG)
PULSAR TREMOLO tonepad
REBOTE DELAY 2.5 TONEPAD
PHASE 100 GGG
DISTORTION PLUS (GGG)
BIG MUFF ggg
SANS AMP GT2 tonepad
FUZZ FACTORY
INTERFAX HARMONIC PERCOLATOR
MXR DynaComp
MAESTRO FSH1 tonepad
ibanez tube screamer
RAT
PHASE 45
PHASE 90
MXR envelope filter
TREMULUS LUNE
Analog Man King of Tone v.4
Chorus small Clone
Wooly Mammoth
AMZ booster
ZVEX MACHINE
Weird Sound Generator
Tremolo Catalinbread Valcoder
PLEXITONE
AC-TONE
Cacophonator
Flanger Electric Mistress - Has thanked: 10 times
- Been thanked: 21 times
And what is the real value of the capacitor going to the central lug of the fuzz pot?
in the first draw is 221 but in the other two schematics is 224
in the first draw is 221 but in the other two schematics is 224
- Attachments
-
- ED22.jpg (33.63 KiB) Viewed 1888 times
- gigelmargel
- Resistor Ronker
The cap is 220pf for sure. It's in the feedback loop of an op-amp, so 220nF is far too high. I've built it with 220nF and I had no fuzz.ftelettronica wrote:And what is the real value of the capacitor going to the central lug of the fuzz pot?
in the first draw is 221 but in the other two schematics is 224
- jrfox92
- Breadboard Brother
Information
- Posts: 70
- Joined: 11 Jun 2014, 04:46
- Completed builds: Death by Audio Fuzz War
Electro-Harmonix Big Muff Pi V5
Skreddy Lunar Module
Colorsound Overdriver
Electro-Harmonix Big Muff Pi Multi-Diode and Feedback Mod
Electro-Harmonix Holy Grail Room Reverb and Reverb Length Mod
Boss DS-1 Synth Circuit Bend - Location: Akron, Ohio
- Has thanked: 3 times
- Been thanked: 54 times
PCB says 221.
Build a rebote 2.5 ..
- jrfox92
- Breadboard Brother
Information
- Posts: 70
- Joined: 11 Jun 2014, 04:46
- Completed builds: Death by Audio Fuzz War
Electro-Harmonix Big Muff Pi V5
Skreddy Lunar Module
Colorsound Overdriver
Electro-Harmonix Big Muff Pi Multi-Diode and Feedback Mod
Electro-Harmonix Holy Grail Room Reverb and Reverb Length Mod
Boss DS-1 Synth Circuit Bend - Location: Akron, Ohio
- Has thanked: 3 times
- Been thanked: 54 times
+1BetterOffShred wrote:Build a rebote 2.5 ..
Most of the Echo Dream's character comes from the fuzz and modulation circuit.
If you're not sure which parts are the fuzz and modulation, you probably shouldn't try messing around with the circuit right now.