Dunlop - JHF3 Band of Gypsys Fuzz Face  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby FuzzMonkey » 06 Feb 2015, 03:55

Image

One assumes its the same circuit as its little brother.
FuzzMonkey
Breadboard Brother
 
Posts: 65
Joined: 28 Dec 2009, 23:10
Has thanked: 16 times
Have thanks: 14 times

Re: Dunlop Band of Gypsys JHF3 Fuzz Face  [traced]

Postby The Rotagilla » 09 Feb 2015, 23:40

I thought I had read that it's the fuzz side of an Octavia pedal.
The television will not be revolutionized.
User avatar
The Rotagilla
Diode Debunker
 
Posts: 714
Joined: 20 Aug 2007, 19:24
Has thanked: 6 times
Have thanks: 48 times

Re: Dunlop Band of Gypsys JHF3 Fuzz Face

Postby FuzzMonkey » 10 Feb 2015, 10:34

So it seems.
FuzzMonkey
Breadboard Brother
 
Posts: 65
Joined: 28 Dec 2009, 23:10
Has thanked: 16 times
Have thanks: 14 times

Re: Dunlop Band of Gypsys JHF3 Fuzz Face

Postby FuzzMonkey » 09 Mar 2015, 10:36

Some more images:

Image

Image

Image

For this message the author FuzzMonkey has received thanks: 3
beedotman (10 Mar 2015, 10:42), modman (09 Mar 2015, 11:22), storzio (15 Mar 2015, 03:08)
FuzzMonkey
Breadboard Brother
 
Posts: 65
Joined: 28 Dec 2009, 23:10
Has thanked: 16 times
Have thanks: 14 times

Re: Dunlop Band of Gypsys JHF3 Fuzz Face

Postby FuzzMonkey » 13 Aug 2015, 09:46

A few other images:

Image

Image

Image

For this message the author FuzzMonkey has received thanks: 5
Blitz Krieg (17 Aug 2015, 07:29), idy (13 Aug 2015, 16:15), modman (13 Aug 2015, 14:11), nooneknows (14 Aug 2015, 21:46), storyboardist (13 Aug 2015, 19:41)
FuzzMonkey
Breadboard Brother
 
Posts: 65
Joined: 28 Dec 2009, 23:10
Has thanked: 16 times
Have thanks: 14 times

Re: Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby FausterCraster » 18 Mar 2017, 21:27

Up.. I'm going to buil it.
Please note that looking to the board I noticed different values for R11 and R13

Anyone know what is the capacitor on C7 ?
What are NPN Transistor Q1 & Q2 ?

R1 680k
R2 820k
R3 180k
R4 220K
R5 1K
R6 220K
R7 470E
R8 47k
R9 100E
R10 1K
R11 470E (NO 560E)
R12 1K
R13 220E (NO 100E)

C1 22U
C2 CERAMIC MULTILAYER (150p maybe)
C3 100N
C4 100N
C5 22U
C6 22U
C7 POLARIZED ??
C8 4N7
C9 4N7
C10 1N

Q1 & Q2 ??
Q3 BC558

While R101, C101, C102, C103 are not present onto the board (as far as I see).

Double check is welcome.
TX
FausterCraster
 
Posts: 10
Joined: 27 Sep 2016, 06:52
Has thanked: 4 times
Have thanks: 1 time

Re: Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby mirosol » 19 Mar 2017, 10:05

A few more shots would clear things up. However, i believe the R101, C101, C102 and C103 may be SMD parts under the board. This would be consistent with Dunlop build methods.
As for C7, my guess would be 1u axial tantalum. Again, the value isn't visible on the photos. C1 could also be 1n. This is based on the guess that all the rest of picofarad value caps may be SMD.

Maybe that's enough guesses? Breadboarding could help.

For this message the author mirosol has received thanks:
FausterCraster (19 Mar 2017, 12:11)
User avatar
mirosol
Solder Soldier
 
Posts: 223
Joined: 11 Mar 2012, 17:15
Location: TKU, FI
Has thanked: 109 times
Have thanks: 258 times

Re: Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby FausterCraster » 19 Mar 2017, 12:22

C1 can't be 1n.. maybe you meant C101.
All multilayer caps are yellow ones (clearly in the picture), so I suspect C101, C102, C103 are in pF.

BTW, what about NPN transistor (which one) ?

TX
FausterCraster
 
Posts: 10
Joined: 27 Sep 2016, 06:52
Has thanked: 4 times
Have thanks: 1 time

Re: Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby mirosol » 19 Mar 2017, 12:28

Ah! My bad. Typoed the designation. I meant C2. This would make sense as 1n since the 101 etc are most likely in picofarad range. Or it could possibly be 10n as well - as found in some tonebenders to tame the screeching highs from the input.

Again, guesses :) I haven't seen the original except for photos.
User avatar
mirosol
Solder Soldier
 
Posts: 223
Joined: 11 Mar 2012, 17:15
Location: TKU, FI
Has thanked: 109 times
Have thanks: 258 times

Re: Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby EmmG » 19 Mar 2017, 12:59

Here's another shot I found online. I looked up C7's label (1425) on the Kemet site and got this number back: T111B904K050AS. It's a 0.9uf.

Image

For this message the author EmmG has received thanks: 2
dv8r601 (22 Mar 2017, 23:59), mirosol (19 Mar 2017, 13:17)
EmmG
 
Posts: 18
Joined: 11 Nov 2012, 03:03
Has thanked: 8 times
Have thanks: 6 times

Re: Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby mirosol » 19 Mar 2017, 13:19

Nice! Still, for a build, the 1u will be close enough.

So what we're basically missing is the bottom images and a value for that MLCC. Transistor type is somewhat irrelevant as one could argue other being better than another for days.
User avatar
mirosol
Solder Soldier
 
Posts: 223
Joined: 11 Mar 2012, 17:15
Location: TKU, FI
Has thanked: 109 times
Have thanks: 258 times

Re: Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby ThiagoFaraday » 22 Mar 2017, 23:39

R13 120E
You do not have the required permissions to view the files attached to this post.

For this message the author ThiagoFaraday has received thanks:
dv8r601 (22 Mar 2017, 23:58)
User avatar
ThiagoFaraday
 
Posts: 28
Joined: 18 Nov 2016, 12:34
Location: Londrina - PR, Brazil
Has thanked: 43 times
Have thanks: 13 times

Re: Dunlop - JHF3 Band of Gypsys Fuzz Face

Postby tube-exorcist » Yesterday, 12:51

ThiagoFaraday wrote:R13 120E


R13 = 10k
"I've noticed there's an inverse relationship between cost of gear and talent. If you need the most expensive gear to get decent tones, then you suck as a player."
tube-exorcist
Cap Cooler
 
Posts: 462
Joined: 05 Jul 2007, 21:09
Has thanked: 210 times
Have thanks: 75 times


Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: zaphod777 and 4 guests