Page 1 of 1
Bypass switch/selector
Posted: 23 Dec 2016, 05:56
by POTL
Hello
Share opinions how to make the switch from true bypass to buffer
Like Mi Audio Boost n Buff or Wampler Decibel+
Re: Bypass switch/selector
Posted: 27 Dec 2016, 07:30
by POTL
JUMP!
Re: Bypass switch/selector
Posted: 27 Dec 2016, 09:18
by plush
POTL wrote:Hello
Share opinions how to make the switch from true bypass to buffer
Like Mi Audio Boost n Buff or Wampler Decibel+
The easiest way is to simply bypass the buffer with a dip switch or panel mount toggle
Couple of spdt or one dpdt should do the job
You can also turn on and off buffer's dc supply with another spdt to save your battery when you are in true bypass mode
Re: Bypass switch/selector
Posted: 27 Dec 2016, 09:39
by POTL
bro can you make a cirquit or link to a cirquit?
Re: Bypass switch/selector
Posted: 28 Dec 2016, 10:01
by plush
POTL wrote:bro can you make a cirquit or link to a cirquit?
Yeah, i guess
link:
https://i.imgur.com/3gX1JYJ.jpg
Re: Bypass switch/selector
Posted: 28 Dec 2016, 20:47
by POTL
do you think this will work?
I then drew something similar but was not exactly sure
https://pp.vk.me/c636220/v636220754/2f3 ... KZU1fo.jpg
This is my version of the MXR Micro Amp and JHS Black Buffer
Re: Bypass switch/selector
Posted: 29 Dec 2016, 09:34
by plush
POTL wrote:
do you think this will work?
There is no way it shouldn't.
Also you'd better adjust your buffer's output volume to match the bypassed signal if you haven't done it yet.
Re: Bypass switch/selector
Posted: 29 Dec 2016, 13:15
by phatt
Re: Bypass switch/selector
Posted: 29 Dec 2016, 21:38
by POTL
plush wrote:POTL wrote:
do you think this will work?
There is no way it shouldn't.
Also you'd better adjust your buffer's output volume to match the bypassed signal if you haven't done it yet.
strange it seemed to me then that I have drawn corresponds to the fact that you sent the link to me
regarding the volume knob - it was designed by MXR as I wrote above
on my circuit bypass DPDT switch goes on and there are 2 position
first bypass
second buffer
pins 1 and 4 on the bypass
5 and 2 are connected by track
6 and 3 on the buffer
that is, the buffer may be included along with a booster and separately
Re: Bypass switch/selector
Posted: 04 Jan 2017, 15:52
by POTL
BUMP
Re: Bypass switch/selector
Posted: 05 Jan 2017, 18:03
by POTL
S2 rotated 180 degrees
who thinks that?
Re: Bypass switch/selector
Posted: 15 Jan 2017, 23:51
by POTL
Hello
I redid the circuit, I want to ask whether all is correct
Switch 1 is a 3PDT stompbox
Switch 2 is a DPDT bypass true or buffer
Re: Bypass switch/selector
Posted: 16 Jan 2017, 11:19
by phatt
This might help clarify the switch wire up you need. I've left out the Led as I'm sure that is ok
Phil.
Re: Bypass switch/selector
Posted: 16 Jan 2017, 11:24
by POTL
phatt wrote:This might help clarify the switch wire up you need. I've left out the Led as I'm sure that is ok
Phil.
Yeah cool
I was very close
Thanks bro