Lovepedal Champ  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
User avatar
WellinAudio
Information
Posts: 2
Joined: 07 Nov 2017, 12:52

Post by WellinAudio »

Frabbio wrote:You are missing the 2.2M resistor between base and collector, and the electrolytic capacitors are 47uF, not 47nF.

Fixed the capacitors, thanks!

So the 2.2M resistor goes between B and C? Something like this? https://ibb.co/nQ1ZSb

I also saw the 4001 diode on the breadboard layout, but I couldn't find it on the hand drawn schematic. Is it connected between B+ and C4?

User avatar
Frabbio
Breadboard Brother
Information
Posts: 81
Joined: 27 Jul 2010, 13:25
Has thanked: 11 times
Been thanked: 97 times

Post by Frabbio »

The 1n4001 is there for protection against inversed polarity, you can omit it.
C1 in your schematic should be 47 nanofarad.
The 2.2M is as in your schematic.
This is a modded Electra distortion, if you search the schematic on google you will see it's almost identical.

User avatar
andregarcia57
Cap Cooler
Information
Posts: 572
Joined: 16 Nov 2008, 15:42
Has thanked: 73 times
Been thanked: 109 times

Post by andregarcia57 »

chamb is even schematic JTM checks?

Image

User avatar
Manfred
Tube Twister
Information
Posts: 1937
Joined: 04 Apr 2009, 23:42
Has thanked: 1672 times
Been thanked: 1344 times

Post by Manfred »

Here the separate drawing of the Lovepedal JTM schematic according the layouts from above.
Lovepedal_JTM_schematic.JPG

Post Reply