Lovepedal Champ  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Re: Lovepedal Champ

Postby WellinAudio » 07 Nov 2017, 18:56

Frabbio wrote:You are missing the 2.2M resistor between base and collector, and the electrolytic capacitors are 47uF, not 47nF.



Fixed the capacitors, thanks!

So the 2.2M resistor goes between B and C? Something like this? https://ibb.co/nQ1ZSb

I also saw the 4001 diode on the breadboard layout, but I couldn't find it on the hand drawn schematic. Is it connected between B+ and C4?
WellinAudio
 
Posts: 2
Joined: 07 Nov 2017, 13:52
Has thanked: 0 time
Have thanks: 0 time

Re: Lovepedal Champ

Postby Frabbio » 08 Nov 2017, 14:46

The 1n4001 is there for protection against inversed polarity, you can omit it.
C1 in your schematic should be 47 nanofarad.
The 2.2M is as in your schematic.
This is a modded Electra distortion, if you search the schematic on google you will see it's almost identical.
Frabbio
Breadboard Brother
 
Posts: 74
Joined: 27 Jul 2010, 14:25
Has thanked: 10 times
Have thanks: 74 times

Re: Lovepedal Champ  [traced]

Postby andregarcia57 » 15 Mar 2018, 00:00

chamb is even schematic JTM checks?

Image

For this message the author andregarcia57 has received thanks:
Manfred (15 Mar 2018, 00:50)
andregarcia57
Resistor Ronker
 
Posts: 447
Joined: 16 Nov 2008, 16:42
Has thanked: 0 time
Have thanks: 87 times

Re: Lovepedal Champ

Postby Manfred » 03 Apr 2018, 12:57

Here the separate drawing of the Lovepedal JTM schematic according the layouts from above.
Lovepedal_JTM_schematic.JPG
You do not have the required permissions to view the files attached to this post.
Manfred
Cap Cooler
 
Posts: 662
Joined: 05 Apr 2009, 00:42
Has thanked: 951 times
Have thanks: 501 times

Previous

Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: ACME_INC, squirrels, thesmokingman and 19 guests