Lovepedal Champ  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Re: Lovepedal Champ

Postby WellinAudio » 07 Nov 2017, 18:56

Frabbio wrote:You are missing the 2.2M resistor between base and collector, and the electrolytic capacitors are 47uF, not 47nF.

Fixed the capacitors, thanks!

So the 2.2M resistor goes between B and C? Something like this?

I also saw the 4001 diode on the breadboard layout, but I couldn't find it on the hand drawn schematic. Is it connected between B+ and C4?
Posts: 2
Joined: 07 Nov 2017, 13:52
Has thanked: 0 time
Have thanks: 0 time

Re: Lovepedal Champ

Postby Frabbio » 08 Nov 2017, 14:46

The 1n4001 is there for protection against inversed polarity, you can omit it.
C1 in your schematic should be 47 nanofarad.
The 2.2M is as in your schematic.
This is a modded Electra distortion, if you search the schematic on google you will see it's almost identical.
Breadboard Brother
Posts: 71
Joined: 27 Jul 2010, 14:25
Has thanked: 10 times
Have thanks: 71 times

Re: Lovepedal Champ  [traced]

Postby andregarcia57 » 15 Mar 2018, 00:00

chamb is even schematic JTM checks?


For this message the author andregarcia57 has received thanks:
Manfred (15 Mar 2018, 00:50)
Resistor Ronker
Posts: 447
Joined: 16 Nov 2008, 16:42
Has thanked: 0 time
Have thanks: 86 times

Re: Lovepedal Champ

Postby Manfred » 03 Apr 2018, 12:57

Here the separate drawing of the Lovepedal JTM schematic according the layouts from above.
You do not have the required permissions to view the files attached to this post.
Cap Cooler
Posts: 539
Joined: 05 Apr 2009, 00:42
Has thanked: 891 times
Have thanks: 398 times


Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: fuzzbunny, Naga, POTL, roseblood11 and 22 guests