Alexander Pedals - Equilibrium

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Alexander Pedals - Equilibrium

Postby jtn191 » 16 Jul 2017, 07:09

Fav new trem/modulation pedal...
You do not have the required permissions to view the files attached to this post.
jtn191
Solder Soldier
 
Posts: 166
Joined: 01 Jan 2011, 11:28
Has thanked: 36 times
Have thanks: 24 times

Re: Alexander Pedals Equilibrium

Postby plush » 16 Jul 2017, 08:58

Hi!

There is no point of sharing another typical FV-1 layout, with a scent of boutiqueness and rosin, without grabbing the firmware - 24LC chip is asking for it, it's not even soldered :D

For this message the author plush has received thanks:
bmxguitarsbmx (20 Jul 2017, 14:32)
User avatar
plush
 
Posts: 43
Joined: 08 Dec 2015, 10:29
Has thanked: 17 times
Have thanks: 11 times

Re: Alexander Pedals Equilibrium

Postby Ice-9 » 16 Jul 2017, 20:04

there is an ugly amount of un-cleaned flux all over the PCB . :hmmm:
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?
User avatar
Ice-9
Diode Debunker
 
Posts: 997
Joined: 31 Mar 2009, 16:29
Has thanked: 128 times
Have thanks: 330 times

Re: Alexander Pedals Equilibrium

Postby jtn191 » 17 Jul 2017, 06:52

plush wrote:Hi!

There is no point of sharing another typical FV-1 layout, with a scent of boutiqueness and rosin, without grabbing the firmware - 24LC chip is asking for it, it's not even soldered :D


well if someone wanted to see inside, there ya go! ;)
jtn191
Solder Soldier
 
Posts: 166
Joined: 01 Jan 2011, 11:28
Has thanked: 36 times
Have thanks: 24 times

Re: Alexander Pedals Equilibrium

Postby plush » 20 Jul 2017, 08:47

jtn191 wrote:
plush wrote:Hi!

There is no point of sharing another typical FV-1 layout, with a scent of boutiqueness and rosin, without grabbing the firmware - 24LC chip is asking for it, it's not even soldered :D


well if someone wanted to see inside, there ya go! ;)



Hey man, I'm sorry for being a jerk :(
I occasionally forget that working with dsp can be a bit complicated and require some additional tools and knowledge.
Thanks for sharing.
User avatar
plush
 
Posts: 43
Joined: 08 Dec 2015, 10:29
Has thanked: 17 times
Have thanks: 11 times


Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: antisyst, Ice-9, philos2001 and 5 guests