Analogman - King of Tone new layout w/pots on board.

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
sego91
Information
Posts: 11
Joined: 02 Oct 2013, 17:10
Location: Prague, Czech Republic
Has thanked: 13 times
Been thanked: 15 times
Contact:

Post by sego91 »

Hey guys!
I've been learning and researching around any post at the forum, so now is my turn to contribute with something I've done.

I just finished this layout for Prince of Tone, or King Of Tone if you connect two boards together, with pots on board and Prescence external pot and diode switching by external SPDT.
Image


I'm making right now a docuent to attach with all de required info!
It should fit confortably in 125B enclousure.

Any opinions and coments are welcome!

User avatar
newly
Breadboard Brother
Information
Posts: 69
Joined: 31 Oct 2009, 09:55
Has thanked: 3 times
Been thanked: 2 times

Post by newly »

Great layout. If i may, can i have the trace side?

User avatar
POTL
Resistor Ronker
Information
Posts: 335
Joined: 26 Sep 2016, 03:11
Has thanked: 58 times
Been thanked: 67 times

Post by POTL »

newly wrote:Great layout. If i may, can i have the trace side?
Hello, both sides are identical
Just print this board 2 times and connect the wires to their power and ground

User avatar
plush
Cap Cooler
Information
Posts: 640
Joined: 08 Dec 2015, 09:29
Location: Moscow, Evil Russia
Has thanked: 36 times
Been thanked: 171 times

Post by plush »

POTL wrote:
newly wrote:Great layout. If i may, can i have the trace side?
Hello, both sides are identical
Just print this board 2 times and connect the wires to their power and ground
He's asking for a transfer layout, the thing you stick to your copper clad, that has no legend and components drawn on it.

User avatar
sego91
Information
Posts: 11
Joined: 02 Oct 2013, 17:10
Location: Prague, Czech Republic
Has thanked: 13 times
Been thanked: 15 times
Contact:

Post by sego91 »

Hey guys, sorry for the delay! I didnt see all the replies to this post until now. So here I leave you the Building documents for the proper etching :D


https://www.dropbox.com/s/1hhi37x6x9j4v ... L.pdf?dl=0
Attachments
KOT-FINAL.pdf
(3.66 MiB) Downloaded 203 times

Post Reply