Page 1 of 1

King of Tone new layout w/pots on board.

PostPosted: 10 Aug 2017, 16:49
by sego91
Hey guys!
I've been learning and researching around any post at the forum, so now is my turn to contribute with something I've done.

I just finished this layout for Prince of Tone, or King Of Tone if you connect two boards together, with pots on board and Prescence external pot and diode switching by external SPDT.
Image


I'm making right now a docuent to attach with all de required info!
It should fit confortably in 125B enclousure.

Any opinions and coments are welcome!

Re: King of Tone new layout w/pots on board.

PostPosted: 01 Sep 2017, 12:55
by newly
Great layout. If i may, can i have the trace side?

Re: King of Tone new layout w/pots on board.

PostPosted: 01 Sep 2017, 16:37
by POTL
newly wrote:Great layout. If i may, can i have the trace side?

Hello, both sides are identical
Just print this board 2 times and connect the wires to their power and ground

Re: King of Tone new layout w/pots on board.

PostPosted: 01 Sep 2017, 16:56
by plush
POTL wrote:
newly wrote:Great layout. If i may, can i have the trace side?

Hello, both sides are identical
Just print this board 2 times and connect the wires to their power and ground


He's asking for a transfer layout, the thing you stick to your copper clad, that has no legend and components drawn on it.

Re: King of Tone new layout w/pots on board.

PostPosted: 08 Nov 2017, 16:18
by sego91
Hey guys, sorry for the delay! I didnt see all the replies to this post until now. So here I leave you the Building documents for the proper etching :D


https://www.dropbox.com/s/1hhi37x6x9j4vch/KOT-FINAL.pdf?dl=0