BJFE-Baby Blue  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Re: BJFE-Baby Blue

Postby Jone the Bone » 01 Feb 2018, 09:37

Nick123 wrote:I think I have found an error in the last schematic.
Only the wiper of RV2 should be grounded.


There is no error. In this circuit it doesn't matter, it's only an another way to connect a potentiometer.
Jone the Bone
 
Posts: 11
Joined: 26 Nov 2007, 10:02
Location: Finland
Has thanked: 0 time
Have thanks: 2 times

Re: BJFE-Baby Blue

Postby momo lab » 18 Feb 2018, 15:48

Hi everyone, I'm back!Sorry for not coming so long, but our country has a “Great Wall firewall”,So I have to resort to some network tools to normal visit。
BBOD I have completed the test, 1N4XXX diode for the circuit sound will be bright and thin, so I had to modify the EQ part.Parallel into a 102 capacitor will sound almost exactly the same。
I wish you have fun, thank you.
User avatar
momo lab
Degoop Doctor
 
Posts: 10
Joined: 25 Oct 2017, 12:49
Has thanked: 2 times
Have thanks: 28 times

Re: BJFE-Baby Blue

Postby Manfred » 01 Mar 2018, 12:32

Hi momo lab,

I would very much appreciate it if could you measure the drain and source voltages an give the read values to us.
Manfred
Cap Cooler
 
Posts: 582
Joined: 05 Apr 2009, 00:42
Has thanked: 914 times
Have thanks: 455 times

Re: BJFE-Baby Blue

Postby momo lab » 04 Mar 2018, 11:52

Manfred wrote:Hi momo lab,

I would very much appreciate it if could you measure the drain and source voltages an give the read values to us.
QQ截图20180304185035.jpg
You do not have the required permissions to view the files attached to this post.

For this message the author momo lab has received thanks:
Manfred (04 Mar 2018, 15:54)
User avatar
momo lab
Degoop Doctor
 
Posts: 10
Joined: 25 Oct 2017, 12:49
Has thanked: 2 times
Have thanks: 28 times

Re: BJFE-Baby Blue

Postby Manfred » 04 Mar 2018, 16:01

momo lab wrote:
Manfred wrote:Hi momo lab,

I would very much appreciate it if could you measure the drain and source voltages an give the read values to us.
QQ截图20180304185035.jpg


Thanks for the hint, I checked the topic twice, but I have overlooked. :slap:
Manfred
Cap Cooler
 
Posts: 582
Joined: 05 Apr 2009, 00:42
Has thanked: 914 times
Have thanks: 455 times

Re: BJFE-Baby Blue

Postby Manfred » 06 Mar 2018, 11:05

After the measurement, the first stage FET voltage is 4.62V and 1.72V, the second stage FET voltage is 4.72 / 1.68 and the third stage is 5.55 / 1.44.

I got a bunch of 2N3822 FETs, which are almost equal as the 2N5952 FET, except the maximum voltage and current values.
I ran a curve traces of it, to drawing in the resitor values in found characteristic curves graphic.
The graphical soultion gave values in the vicinity of the read values of momo lab's measurement,
therefore the 2N5252 seem to be the right choice.
Manfred
Cap Cooler
 
Posts: 582
Joined: 05 Apr 2009, 00:42
Has thanked: 914 times
Have thanks: 455 times

Re: BJFE-Baby Blue

Postby ray86 » 08 Mar 2018, 14:11

Fairly straight forward JFET circuit with hard clipping in the 2nd stage
ray86
 
Posts: 2
Joined: 08 Mar 2018, 14:05
Has thanked: 0 time
Have thanks: 0 time

Previous

Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: brejna, Hadjimourat and 4 guests