Friedman - Buxom Boost

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Friedman - Buxom Boost

Postby bugg » 13 Jan 2018, 03:28

Schematic.png

PCBs are on the way - http://www.pedalpcb.com/product/bettyboost/
You do not have the required permissions to view the files attached to this post.

For this message the author bugg has received thanks: 12
blackbunny (17 Jan 2018, 09:57), DonDougie (13 Jan 2018, 20:07), dv8r601 (15 Jan 2018, 16:28), Intripped (15 Jan 2018, 22:32), J0K3RX (15 Jan 2018, 22:57), mirosol (13 Jan 2018, 19:57), mr coffee (28 Jan 2018, 18:26), nexion777 (15 Jan 2018, 19:51), toneman (15 Jan 2018, 19:39), vot (13 Jan 2018, 04:57) and 2 more users
bugg
Breadboard Brother
 
Posts: 94
Joined: 11 Feb 2013, 04:10
Has thanked: 30 times
Have thanks: 216 times

Re: Friedman - Buxom Boost

Postby Lithium_Grim » 15 Jan 2018, 09:02

That is a complex powersection. Why so complex, normally a -9v requires a lot less components? Can anyone give some insight?
Lithium_Grim
 
Posts: 39
Joined: 21 Apr 2013, 09:45
Has thanked: 5 times
Have thanks: 14 times

Re: Friedman - Buxom Boost

Postby toneman » 15 Jan 2018, 19:45

Q1 and VR1 form a preregulator for the LT1054 which is sensitive to overvoltage.
Too much input and POOF!
U could do this with 2 9V batteries but what's the fun in that?
8)
Tone-to-the-Bone
User avatar
toneman
Resistor Ronker
 
Posts: 273
Joined: 17 Jul 2007, 14:05
Location: sacatomatoes, Kali4nia
Has thanked: 87 times
Have thanks: 19 times

Re: Friedman - Buxom Boost

Postby LeroyP » 02 Feb 2018, 03:02

The first to op amps have gains of only 1.47 each?? Is that right?? With the gain control turned up full the total numerical gain for the three stages combined is only around 20 (26db).
This could be achieved by having one stage and a 200k pot instead of the three stages plus the 100k pot.

Am i missing something??

Thanks
Leroy
LeroyP
 
Posts: 3
Joined: 18 Sep 2015, 05:52
Has thanked: 0 time
Have thanks: 0 time

Re: Friedman - Buxom Boost

Postby alexradium » 14 Feb 2018, 16:22

LeroyP wrote:The first to op amps have gains of only 1.47 each?? Is that right?? With the gain control turned up full the total numerical gain for the three stages combined is only around 20 (26db).
This could be achieved by having one stage and a 200k pot instead of the three stages plus the 100k pot.

Am i missing something??

Thanks
Leroy
26 dB is plenty of gain for any application,as a clean boost,the use of more stages is because of the tight filter to work independently of the volume boost and be separated from the guitar input.
Even if you could kill 3 birds with one stone,why not throwing a couple more for fun if it doesn't cost much more,i mean 2 or 3 TL072s cost very low money,they are machine mounted in big quantities and the pedal sold to more than 200.
alexradium
Resistor Ronker
 
Posts: 260
Joined: 31 Jan 2010, 14:31
Has thanked: 51 times
Have thanks: 53 times


Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: arivabox, phazor, stevie124030 and 24 guests