Keeley - 30ms Double Tracker

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.

Keeley - 30ms Double Tracker

Postby floris » 06 Mar 2018, 19:41

Keeley 30ms Double Tracker gutshots.

Spin Semiconductor FV-1 for audio delay / detune / reverb: http://www.spinsemi.com/products.html
24LC32A 8pin DIP EEPROM that holds the program for the FV-1 chip.
TL074 for the audio path, probably buffers and such to interface with the FV-1 chip.
TQ2-9V "single side stable" DPDT relay that is used for true bypass next to a 3PDT foot-switch.
4x 10kB pots for controlling the parameters of the program running on the FV-1 chip.

2018-03-06 17.11.09.jpg

2018-03-06 17.11.41.jpg

2018-03-06 17.11.34.jpg

2018-03-06 17.33.56.jpg

2018-03-06 17.35.24.jpg

2018-03-06 17.38.36.jpg

2018-03-06 17.46.45.jpg
You do not have the required permissions to view the files attached to this post.

For this message the author floris has received thanks: 4
bmxguitarsbmx (07 Mar 2018, 04:15), Desdog (30 Mar 2018, 17:51), Intripped (08 Mar 2018, 15:16), modman (29 Mar 2018, 23:37)
floris
Resistor Ronker
 
Posts: 433
Joined: 14 Oct 2007, 13:05
Has thanked: 169 times
Have thanks: 55 times

Re: Keeley - 30ms Double Tracker

Postby caspercody » 07 Mar 2018, 16:01

Check out Pedalpcb.com Unison Double tracker. Might help with the schematic.

http://www.pedalpcb.com/product/unison/

For this message the author caspercody has received thanks:
floris (09 Mar 2018, 03:09)
caspercody
Solder Soldier
 
Posts: 234
Joined: 15 Jul 2009, 15:34
Has thanked: 29 times
Have thanks: 37 times

Re: Keeley - 30ms Double Tracker

Postby Boba7 » 07 Mar 2018, 22:51

A relay AND a 3pdt?
Boba7
 
Posts: 28
Joined: 15 May 2015, 00:05
Has thanked: 0 time
Have thanks: 6 times

Re: Keeley - 30ms Double Tracker

Postby floris » 08 Mar 2018, 00:06

Boba7 wrote:A relay AND a 3pdt?

Yes I also found that interesting. Seems overkill.

Also the PCB mentions a "trails" function next to the 2 DIP switches and at the bottom of the PCB.
But this is not implemented as far as I can see.
floris
Resistor Ronker
 
Posts: 433
Joined: 14 Oct 2007, 13:05
Has thanked: 169 times
Have thanks: 55 times

Re: Keeley - 30ms Double Tracker

Postby Boba7 » 08 Mar 2018, 09:23

floris wrote:
Boba7 wrote:A relay AND a 3pdt?

Yes I also found that interesting. Seems overkill.


Is the 3pdt latching or momentary?
Boba7
 
Posts: 28
Joined: 15 May 2015, 00:05
Has thanked: 0 time
Have thanks: 6 times

Re: Keeley - 30ms Double Tracker

Postby floris » 09 Mar 2018, 14:41

Boba7 wrote:Is the 3pdt latching or momentary?

It is a latching switch.
floris
Resistor Ronker
 
Posts: 433
Joined: 14 Oct 2007, 13:05
Has thanked: 169 times
Have thanks: 55 times

Re: Keeley - 30ms Double Tracker

Postby floris » 14 Mar 2018, 19:06

Some picts with IC1 TL074 quad opamp removed:

2018-03-14 16.34.24 - Copy.jpg


2018-03-14 16.34.39.jpg


Opamp B has minus input and output connected together so it is a buffer.
Opamp C has a resistor between input and output and works as an amplifier or mixer.
Opamp D is not used.

In my pedal, the signal was very soft.
Measurements on the IC1 TL074 pins showed that the opamps were not working properly: Output pins were not at V-bias of 4,5V DC.
I replaced IC1 with a new TL074, and all is working again. :thumbsup
You do not have the required permissions to view the files attached to this post.

For this message the author floris has received thanks: 2
bmxguitarsbmx (16 Mar 2018, 21:18), modman (29 Mar 2018, 23:38)
floris
Resistor Ronker
 
Posts: 433
Joined: 14 Oct 2007, 13:05
Has thanked: 169 times
Have thanks: 55 times


Return to Boutique Stompboxes dissected...

Who is online

Users browsing this forum: globus46, rosetta and 25 guests