Brian May's Deacy Amp secrets revealed  [traced]

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
User avatar
lolbou
Old Solderhand
Information
Posts: 2617
Joined: 18 Nov 2008, 21:38
Has thanked: 308 times
Been thanked: 225 times

Post by lolbou »

http://antiqueradios.com/forums/viewtop ... 5&start=20 Problem solved, might be helpful to the thread. It's a Supersonic pr80 radio circuit. (Been posted here before in the Fryer replica thread)...
- Are you a mod or a rocker?
- Uh, no, I'm a mocker.

User avatar
trebbooster
Information
Posts: 8
Joined: 23 Nov 2017, 11:18

Post by trebbooster »

Hello,
I was wondering if anyone would have any idea how to modify the Brain May Deacy amp into a pedal? The strip board diagram I'm looking at using was put up by Paul in the lab https://paulinthelab.blogspot.com/2012/ ... board.html
If anyone here would know how to possibly turn this into a great pedal, please post your mods.
Thank you and have a great week :)

User avatar
bancika
Resistor Ronker
Information
Posts: 279
Joined: 02 Jan 2008, 02:24
Has thanked: 16 times
Been thanked: 89 times

Post by bancika »

sure, you can put a resistive load instead of the speaker and tap the output from there. Google firezog line out.
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com

Post Reply