I`ll verify this tonight, and report back promptly.
I also noticed that there might be a typo on the jonasx26 schematic for one of the lag timing caps. I`m pretty sure it`s a 33uF, and not a 3.3uF. I`ll double check that too.
I also noticed that some of the resistor values on the other drawing don`t make sense. 13M resistor to ground? 1.3M maybe? I dunno, but I ran all the resistors on the unit I have through the DMM, so I know I have what I have. Weird, but open to interpretation.
Not from my end. I`m keeping the original config. I even worked into my vero. The other drawing also reports over +/-9vdc (10.3v), so I`m going with an AC supply, and voltage regulators.Will anyone be working on replacing the 12AC supply for standard 9vDC and charge pump setup?