Ibanez - TS-9DX Turbo Tube Screamer [schematic]
The switch problem seems to be a more logical answer now since signal is being passed through the pedal, its just not screaming!!
Does anyone know what kind of switch the micro switch is? or would a regular stomp box switch work if i mounted it through the top?
Does anyone know what kind of switch the micro switch is? or would a regular stomp box switch work if i mounted it through the top?
- okgb
- Diode Debunker
This could be your chance to go from electronic switching to true bypass 3pdt , although it
maybe wise to determine the problem first , I say try cleaning the switch as an easy step
the switch part itself is not expensive , local music store repair dept may have it .
Let em know if you want anymore pix before I put it back together , regards Greg
maybe wise to determine the problem first , I say try cleaning the switch as an easy step
the switch part itself is not expensive , local music store repair dept may have it .
Let em know if you want anymore pix before I put it back together , regards Greg
switched out the switch. Works like a charm. Thanks for the help man, got a key component of my signal flow back. now i gotta fabricate some new way to secure the spring, ehhhh.
GodSaveMetal, if you need a unmodified PCB pic, i might be able to help
GodSaveMetal, if you need a unmodified PCB pic, i might be able to help
- GodSaveMetal
- Resistor Ronker
YESSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!! thanks, post all the pics , conectors, circuit all in details; thanks man!!!!!bufferbrad wrote:switched out the switch. Works like a charm. Thanks for the help man, got a key component of my signal flow back. now i gotta fabricate some new way to secure the spring, ehhhh.
GodSaveMetal, if you need a unmodified PCB pic, i might be able to help
- GodSaveMetal
- Resistor Ronker
Please bufferbrad I´m waiting for your help, PHOTOS; service notes etc etc!!!
so i built a ts9dx based on tagboard effects layout
http://tagboardeffects.blogspot.fi/2013 ... eamer.html
the only problem is that when in the turbo mode and the drive is up passed half way it turns into a slow kind of tremolo. like the sound kicks in and out. would anyone have any idea why this could happen? too much gain hitting the opamp? someone else had the same problem so i know its not a build error. the other modes work fine so im pretty sure its not a layout problem.
does anyone have an explanation?
http://tagboardeffects.blogspot.fi/2013 ... eamer.html
the only problem is that when in the turbo mode and the drive is up passed half way it turns into a slow kind of tremolo. like the sound kicks in and out. would anyone have any idea why this could happen? too much gain hitting the opamp? someone else had the same problem so i know its not a build error. the other modes work fine so im pretty sure its not a layout problem.
does anyone have an explanation?
- Bernardduur
- Transistor Tuner
I've also got one; quite pleased with it.
My IC is a JRC4558; no mods have been done to this unit
My IC is a JRC4558; no mods have been done to this unit
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
- mictester
- Old Solderhand
Information
Just for the sake of amusement, I built something similar to this, but with a 4066 to select the type of clipping, and a couple of gyrators for the tone controls. I was pleasantly surprised by the results. The IC line-up is a 4558 for the clipper part, a TL074 for the input and output buffers and the two gyrators, two 4066s - one for bypass and the other for clipping selection and a 4013 for the bypass on / off. It's a neat, small PCB, and appears to be mostly full of ICs! All the controls are 500k and 50k linear with tapering resistors where required.
I suppose I should put it in an expensive box, thoroughly goop it, and sell it at some exorbitant price as the "ultimate" boutique device! The boobs at TGP will fall over themselves praising what is - essentially - just another Tube Screamer!
I suppose I should put it in an expensive box, thoroughly goop it, and sell it at some exorbitant price as the "ultimate" boutique device! The boobs at TGP will fall over themselves praising what is - essentially - just another Tube Screamer!
"Why is it humming?" "Because it doesn't know the words!"
- mictester
- Old Solderhand
Information
It's in my notebook. I'll scan it and post it later today.roseblood11 wrote:schematic or it didn't happen...
"Why is it humming?" "Because it doesn't know the words!"