FS | 3PDT true bypass wiring pcb's, low price
Hello guys,
I've got lots of 3PDT true bypass wiring pcb's (based on Mr G's). Realized I don't need that much, so if you want to buy any feel free to pm me.
Price is 0.75$/piece + shipping from Israel (which should be cheap since it's small).
If you'll take 20+ shipping will be probably on me (depends where you're from).
Feel free to contact me.
I've got lots of 3PDT true bypass wiring pcb's (based on Mr G's). Realized I don't need that much, so if you want to buy any feel free to pm me.
Price is 0.75$/piece + shipping from Israel (which should be cheap since it's small).
If you'll take 20+ shipping will be probably on me (depends where you're from).
Feel free to contact me.
Good deals with: orangechili, robinbowes, BaldPaul, itsik, asatbluesboy, elmelka, ebmvitreo, spiralscratch
Information
- Posts: 1
- Joined: 09 Mar 2012, 00:48
I've ordered 50... Now to figure out uses for them all!!! eep! I'm sure opportunities will present themselves
i'm sure you'le make a good use of themcameron_stomp wrote:I've ordered 50... Now to figure out uses for them all!!! eep! I'm sure opportunities will present themselves
Good deals with: orangechili, robinbowes, BaldPaul, itsik, asatbluesboy, elmelka, ebmvitreo, spiralscratch
- biliousfrog
- Resistor Ronker
Information
- Posts: 341
- Joined: 31 Aug 2012, 13:29
- Completed builds: Zen Drive, Fuzz Factory, Really Cheap Compressor, D*A*M 66, Klon Buffer, CryBaby mods, Boss TR2 mods, Various loops and switchers, DOD250, Fulltone Bass Drive, MXR Bluebox mods
- Location: Lowestoft - UK
- Has thanked: 5 times
- Been thanked: 9 times
- Contact:
I've bought these: http://shop.pedalparts.co.uk/3PDT_daugh ... 38065.aspxastrobass wrote:I've never seen a 3PDT with pins instead of lugs. Are the holes on these large enough to accommodate the lugs as pins? They do seem larger in the pic.
They're a snug fit but the lugs fit through - I'm sure that the ones listed are the same.
What are the current prices on these BTW Stinger25?...say for 10, 25, 50, etc. I'm in the UK if it makes a difference.
Yes, I use only lugs,astrobass wrote:I've never seen a 3PDT with pins instead of lugs. Are the holes on these large enough to accommodate the lugs as pins? They do seem larger in the pic.
Here's a pic of it (sorry for poor quality), hope you can see it
Good deals with: orangechili, robinbowes, BaldPaul, itsik, asatbluesboy, elmelka, ebmvitreo, spiralscratch
it's is 0.75$/pc + actual shipping (few bucks), if you take 20 or more the shipping is free.biliousfrog wrote:I've bought these: http://shop.pedalparts.co.uk/3PDT_daugh ... 38065.aspxastrobass wrote:I've never seen a 3PDT with pins instead of lugs. Are the holes on these large enough to accommodate the lugs as pins? They do seem larger in the pic.
They're a snug fit but the lugs fit through - I'm sure that the ones listed are the same.
What are the current prices on these BTW Stinger25?...say for 10, 25, 50, etc. I'm in the UK if it makes a difference.
If you take 50 you get a discount, 50 boards for 30$ shipped.
Good deals with: orangechili, robinbowes, BaldPaul, itsik, asatbluesboy, elmelka, ebmvitreo, spiralscratch
Information
- Posts: 3
- Joined: 03 Oct 2013, 18:22
I ordered some a while back. These are great, and they work with both lugs and pins (I accidentally grabbed 3pdt's with pins in my last Tayda order).
There's been a noticeable reduction in fingertip burns since I got these. Thanks!
There's been a noticeable reduction in fingertip burns since I got these. Thanks!
Thanks, mate!world vs venkman wrote:I ordered some a while back. These are great, and they work with both lugs and pins (I accidentally grabbed 3pdt's with pins in my last Tayda order).
There's been a noticeable reduction in fingertip burns since I got these. Thanks!
Good deals with: orangechili, robinbowes, BaldPaul, itsik, asatbluesboy, elmelka, ebmvitreo, spiralscratch