Do-It-Yourself Layout Creator [open-source] [link]
- rocklander
- Old Solderhand
Information
- Posts: 2726
- Joined: 18 Apr 2008, 11:33
- my favorite amplifier: my jansen bassman 50
- Completed builds: rebote 2.5; supreaux; odie; heartthrob tremolo; ross phaser; dr. boogey; thor; baja black toast; slow gear attack, rebote, tri-vibe, small clone, little angel, magnus modulus, echo base, hex fuzz, big muff, 22/7.
- Location: Rotorua, New Zealand
- Has thanked: 1406 times
- Been thanked: 231 times
- Contact:
is roku on windows or mac?
if it's windows, you could just RDP to the client (there are *cough* patches *cough* available which will let you RDP to a windows box in a separate session, the same way that you can on windows server, and leave the main console unaffected) from your android...
if it's windows, you could just RDP to the client (there are *cough* patches *cough* available which will let you RDP to a windows box in a separate session, the same way that you can on windows server, and leave the main console unaffected) from your android...
world's greatest tautologist ...in the world
Ronsonic wrote:...the lower the stakes the more vicious the combat.
atreidesheir wrote:He should be punched in the vagina.
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Bancika, is it possible to have more control over tube schematic symbols?
Like rotate 90/180/270 degrees, and horizontal flip? Must have for triode
I also just downloaded new version. Funny things happen with ground symbols when copy and paste. All ground symbols are grouped into one point. Try to copy schematic, select it all, copy, and paste below, you'll see what I mean
Cheers and huge thanks, great job!
Like rotate 90/180/270 degrees, and horizontal flip? Must have for triode
I also just downloaded new version. Funny things happen with ground symbols when copy and paste. All ground symbols are grouped into one point. Try to copy schematic, select it all, copy, and paste below, you'll see what I mean
Cheers and huge thanks, great job!
Information
- Posts: 1
- Joined: 18 Aug 2013, 06:33
Cheers!Dr Tony Balls wrote:dang, nevermind. it appears to be a mountain lion bug. If I select allow apps from anywhere then it opens fine!
- xaxxop
- Breadboard Brother
good afternoon people, anyone have diy-layout-creator for OS X 10.4?
thanks for your time
thanks for your time
Leandro
- Dr Tony Balls
- Diode Debunker
The most recent version (3.28.0) doesnt work with 10.9.2, i know that for sure. If you try to open it you get: "DIYLC is damaged and can't be opened. You should move it to the Trash."
As a workaround ive been using the multi-platform version here: https://code.google.com/p/diy-layout-cr ... p&can=2&q=
As a workaround ive been using the multi-platform version here: https://code.google.com/p/diy-layout-cr ... p&can=2&q=
- grrrunge
- Diode Debunker
Information
Which mac are you on? If it's a newer model, 10.9 is free of charge from app store, and app store should be included in the latest update of your system version. I'd recommend that over running an old version of DIYLCxaxxop wrote:good afternoon people, anyone have diy-layout-creator for OS X 10.4?
thanks for your time
A true believer in the magic of Sherwood Forest Pedal Pirates
---
New base of operations: http://www.knucklehead.dk
---
New base of operations: http://www.knucklehead.dk
- xaxxop
- Breadboard Brother
thanks grrrunge. the problem is that my mac is old.
Leandro
- grrrunge
- Diode Debunker
Information
Fair enough. Can't you upgrade to the latest version of Java anyway? That way you should be able to run the universal build.xaxxop wrote:thanks grrrunge. the problem is that my mac is old.
A true believer in the magic of Sherwood Forest Pedal Pirates
---
New base of operations: http://www.knucklehead.dk
---
New base of operations: http://www.knucklehead.dk
- xaxxop
- Breadboard Brother
thanks for reply, I did all the Java upgrade but I don't know what to dogrrrunge wrote:Fair enough. Can't you upgrade to the latest version of Java anyway? That way you should be able to run the universal build.xaxxop wrote:thanks grrrunge. the problem is that my mac is old.
Leandro
Hi everybody,
hope, this is the right place for my post.
I just started to work with diylc version 3.22.0 The tool is awesome!
I run it on a Mac with osx 10.8.5
But there is following issue. When creating templates, they are not saved when I do so.
I choose an item, edit it, go to Save as Template but then there is nothing in the template menu in
the corresponding item.
What could be the matter?
Best regards
Philipp
hope, this is the right place for my post.
I just started to work with diylc version 3.22.0 The tool is awesome!
I run it on a Mac with osx 10.8.5
But there is following issue. When creating templates, they are not saved when I do so.
I choose an item, edit it, go to Save as Template but then there is nothing in the template menu in
the corresponding item.
What could be the matter?
Best regards
Philipp
Just found out: When creating a template with the setting i posted before, if you hold the
right mouse tab and scroll down while holding the mousetab, it creates the desired template.
Thought i'd be fine. safed the project, reopened it times and times after to be safe.
But then i got a phonecall, closed the programm.
Now all the templates are gone (( Whole afternoon of work wasted.
What the hell is the thing?
right mouse tab and scroll down while holding the mousetab, it creates the desired template.
Thought i'd be fine. safed the project, reopened it times and times after to be safe.
But then i got a phonecall, closed the programm.
Now all the templates are gone (( Whole afternoon of work wasted.
What the hell is the thing?
- ilcaccillo
- Breadboard Brother
DIYLC V3 doesnt work in my OSX 10.7.5 (Lion),
I have the latest Java version installed,
when I click the DIYLC icon nothing happens!
I can open the DIYLC V3 (any version 3) multiplataform DIYLC.JAR file,
although I receive message saying it's not recommended to use the JAR file, thats really the only way to open this software
I have the latest Java version installed,
when I click the DIYLC icon nothing happens!
I can open the DIYLC V3 (any version 3) multiplataform DIYLC.JAR file,
although I receive message saying it's not recommended to use the JAR file, thats really the only way to open this software
- deltafred
- Opamp Operator
Old guy here who needs a bit of help.
I installed DIYLC onto my Ubuntu Linux 14.04 (LTS) PC. When I try and draw a (perf) board the components are huge, e.g. resistors are plain blue with no bands, they look like 1/4 or 1/2 watt.
I am assuming that to get the nice little 1/8th watt resistors with bands (and other suitable components) I need a library. Can anyone suggest where I could get a suitable one and how do I install it?
Thanks in advance.
I installed DIYLC onto my Ubuntu Linux 14.04 (LTS) PC. When I try and draw a (perf) board the components are huge, e.g. resistors are plain blue with no bands, they look like 1/4 or 1/2 watt.
I am assuming that to get the nice little 1/8th watt resistors with bands (and other suitable components) I need a library. Can anyone suggest where I could get a suitable one and how do I install it?
Thanks in advance.
Politics is the art of so plucking the goose as to obtain the most feathers with the least squawking. - R.G. 2011
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012
- bancika
- Resistor Ronker
you need to set resistor values for bands to show up (double click and input value in the box).
Btw, I just released version 3.29.0 with a few new features and fixes. You can find it on github https://github.com/bancika/diy-layout-creator/releases
Btw, I just released version 3.29.0 with a few new features and fixes. You can find it on github https://github.com/bancika/diy-layout-creator/releases
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- deltafred
- Opamp Operator
Thanks Bancika, I discovered that after posting.bancika wrote:you need to set resistor values for bands to show up (double click and input value in the box).
Btw, I just released version 3.29.0 with a few new features and fixes. You can find it on github https://github.com/bancika/diy-layout-creator/releases
I will load the new version but doubt I will get much done with it over the summer, winter is when I hibernate in my workshop.
Politics is the art of so plucking the goose as to obtain the most feathers with the least squawking. - R.G. 2011
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012
- bancika
- Resistor Ronker
I have published the first beta version to https://github.com/bancika/diy-layout-c ... _3_32_Beta
The main new feature is "Project Cloud" that allows project sharing between users. You can upload your projects, search for and download other people's projects and post public comments on any project.
Feel free to give it a go. The new feature can be accessed from the main menu. You'll need to create an account (takes only few seconds) to publish projects and post comments.
Please note that at the end of the testing period, the cloud storage will be cleared to remove rubbish test data and we will start from scratch.
Stuff that's not yet ready:
"Manage My Projects" feature doesn't do anything. I plan to make it possible to update and delete projects.
Categories need some refinement (please suggest new categories)
Keywords will be auto-generated when the project is selected to contain key project information, this doesn't work at the moment
Thank you for testing and please make sure to report any feedback to bancika@gmail.com
The main new feature is "Project Cloud" that allows project sharing between users. You can upload your projects, search for and download other people's projects and post public comments on any project.
Feel free to give it a go. The new feature can be accessed from the main menu. You'll need to create an account (takes only few seconds) to publish projects and post comments.
Please note that at the end of the testing period, the cloud storage will be cleared to remove rubbish test data and we will start from scratch.
Stuff that's not yet ready:
"Manage My Projects" feature doesn't do anything. I plan to make it possible to update and delete projects.
Categories need some refinement (please suggest new categories)
Keywords will be auto-generated when the project is selected to contain key project information, this doesn't work at the moment
Thank you for testing and please make sure to report any feedback to bancika@gmail.com
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- bancika
- Resistor Ronker
Just deployed a new version. Below is the change log and you can grab it from here https://github.com/bancika/diy-layout-creator/releases
[New Feature] Terminal strip component added
[New Feature] Battery schematic symbol added
[New Feature] Glass diode component added
[New Feature] SMD capacitor and resistor added
[Improvement] Tube, transistor and potentiometer symbols can be rotated
[Improvement] Added percent text box next to the slider for editors like Alpha or Scale
[Improvement] Better object line representation when zoomed in
[Improvement] Increased maximum zoom range from 200% to 300%
[Improvement] Improved pentode symbol without the suppressor grid
[New Feature] Terminal strip component added
[New Feature] Battery schematic symbol added
[New Feature] Glass diode component added
[New Feature] SMD capacitor and resistor added
[Improvement] Tube, transistor and potentiometer symbols can be rotated
[Improvement] Added percent text box next to the slider for editors like Alpha or Scale
[Improvement] Better object line representation when zoomed in
[Improvement] Increased maximum zoom range from 200% to 300%
[Improvement] Improved pentode symbol without the suppressor grid
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- bancika
- Resistor Ronker
Hot off the press, the last release in 2016. You can find it here https://github.com/bancika/diy-layout-c ... ag/v3.34.0
[New Feature] Searchable component tree instead of the old toolbar (can be changed back from "Config" menu)
[New Feature] Open 1/4" Switchcraft-style jack added
[New Feature] LP-style switch added
[New Feature] P-90 pickup in both "dog ear" and "soap bar" variations added
[New Feature] Telecaster bridge pickup added as a variation of single coil pickup
[New Feature] Mini humbucker pickup added as a variation of Humbucker pickup
[Improvement] X-axis coordinates for all perfboards are now numberical
[Improvement] Improved trace cut rendering to look more realistic
[Improvement] Improved guitar pickup rendering to look more realistic
[Bug Fix] Using unicode characters (like micro character) in template names breaks the whole config file
[Bug Fix] Fixed broken links in the Help menu
[Bug Fix] TriPad board didn't show coordinate labels even when configured to do so
[New Feature] Searchable component tree instead of the old toolbar (can be changed back from "Config" menu)
[New Feature] Open 1/4" Switchcraft-style jack added
[New Feature] LP-style switch added
[New Feature] P-90 pickup in both "dog ear" and "soap bar" variations added
[New Feature] Telecaster bridge pickup added as a variation of single coil pickup
[New Feature] Mini humbucker pickup added as a variation of Humbucker pickup
[Improvement] X-axis coordinates for all perfboards are now numberical
[Improvement] Improved trace cut rendering to look more realistic
[Improvement] Improved guitar pickup rendering to look more realistic
[Bug Fix] Using unicode characters (like micro character) in template names breaks the whole config file
[Bug Fix] Fixed broken links in the Help menu
[Bug Fix] TriPad board didn't show coordinate labels even when configured to do so
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com