brejna wrote:I don't have supply for good 3PDT switches here in EU, so that is reason why I am starting to use relays. I am using takamisawa at the moment and didn't have any problems.
Yeah, when I say I dropped it I mean I really dropped it, hard! Bout 6ft to be exact from a shelf right onto the concrete garage floor... I doubt most pedals are gonna see that kind of fall so, probably not an issue... I would like to get out my PIC programmer and make a soft touch momentary switch but it's been years since I programmed with it and I would have to learn it all over again... Not enough time in the day.
Oh I understand why relay stoped working
I am not programming PICs, I buy them programmed at the moment. But I am thinking of getting arduino one and try it by my self
brejna wrote:I don't have supply for good 3PDT switches here in EU, so that is reason why I am starting to use relays. I am using takamisawa at the moment and didn't have any problems.
brejna wrote:I don't have supply for good 3PDT switches here in EU, so that is reason why I am starting to use relays. I am using takamisawa at the moment and didn't have any problems.
brejna wrote:I don't have supply for good 3PDT switches here in EU, so that is reason why I am starting to use relays. I am using takamisawa at the moment and didn't have any problems.
Tayda Electronics 3PDT switches are $2.99 a' pop, and they've got cheap shipping to EU. usually between $3 and $5 shipping for $15 worth of parts...
A true believer in the magic of Sherwood ForestPedal Pirates
---
New base of operations: http://www.knucklehead.dk
brejna wrote:I don't have supply for good 3PDT switches here in EU, so that is reason why I am starting to use relays. I am using takamisawa at the moment and didn't have any problems.
Tayda Electronics 3PDT switches are $2.99 a' pop, and they've got cheap shipping to EU. usually between $3 and $5 shipping for $15 worth of parts...
Want to order the parts.
Thanks for that awsome work!
Unfortunately it is 4pdt, you can use 3pdt but without LEDs. Gain pot is meant to be changed with that 4pdt and be carefull with the wiring, all square dots should be on the one side of switch.
Thanks for kind words and credits go JOK3RX, I just did layout
Darksid46 wrote:Нет это не связано с AMT L1 серии.Это новая разработка LIONSOUND14\0 \DarkAngel/ А СИМ я взял от 12версии.+добавил выход на наушники от HotLine2/
No, it is not associated with the AMT L1 series. It is a new development - LIONSOUND14\0\DarkAngel/. And I took the cabsim from version 12 and added the headphone output from HotLine2.
Hmm, I remember DarkAngel modding the SansAmp GT2.
Seeing E530 written on the case and seeing Lionsound on guitar-gear.ru in the AMT stompboxes thread made me think this is related.
The "new development" part makes me think he just wanted to advertise his pedal.