I've double, triple checked for solder/flux bridges between the traces. Still no sound when engaged, only my clean tone when bypassed. The 5mm LED on the board doesn't light up at all when turned on, but the PT2399 gets a bit hot to the touch. That's it. I have no IC voltage ratings since I don't really care about this pedal a lot, but if someone wants them I can go measure it.
Here's a link to the photo album. The voltage regulator in the pictures is NOT the one in there currently; it's now a 78L05, with the traditional transistor shape to it.
https://imgur.com/a/ajkX4
My Pitch Pirate is pirating my pitch
- DrNomis
- Old Solderhand
Information
- Posts: 6807
- Joined: 16 Jul 2009, 04:56
- my favorite amplifier: Self-Built Valve Amp Head :)
- Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
- Location: Darwin,Northern Territory Australia
- Has thanked: 98 times
- Been thanked: 279 times
Have you tried using an audio probe to trace out the signal path to see where you're losing signal?......
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
Wow, I totally forgot I even made this thread. I just remembered five minutes ago.
I haven't probed it yet, I'll try when I have time.
I haven't probed it yet, I'll try when I have time.