Chunk Systems - Agent 00FUNK! [traced]
- chicago_mike
- Tube Twister
I am going to etch madbeans and see whats up. I never got around to it and will finally do that.
Skyline FX 2013
- chicago_mike
- Tube Twister
It's here on page 3?? Maybe?
Search for junk in the trunk. Or something like that.
It is not verified though..so I could run into problems, but that's why we are here.
Search for junk in the trunk. Or something like that.
It is not verified though..so I could run into problems, but that's why we are here.
Skyline FX 2013
- chicago_mike
- Tube Twister
Don't tease me bro!
Skyline FX 2013
- johnk
- Resistor Ronker
it turns out that my posted layout on page 4 is correct. for some reason, my etch had and error where it joined a connection that it shouldn't have. i just cut it with and exacto and it's working fine now.
i just have to go over it to make sure that the pot lug numbering is correct and then i can verify it.
i just have to go over it to make sure that the pot lug numbering is correct and then i can verify it.
- chicago_mike
- Tube Twister
Do I need to scale the pcb image?
Skyline FX 2013
- chicago_mike
- Tube Twister
DOOD!!!!!
You rock!!
You rock!!
Skyline FX 2013
- chicago_mike
- Tube Twister
You finished yours before me! I hate you!
Skyline FX 2013
- chicago_mike
- Tube Twister
I only have bigger boxes so it's going in a BB sized enclosure. The second one I am building will get a smaller enclosure.
But I need really cool 70's style graphics.
But I need really cool 70's style graphics.
Skyline FX 2013
- chicago_mike
- Tube Twister
Hey john!!!
Can you post your voltages? On the chips and at the Zener diode and pitch pot?
I am getting some freq filtering, but not auto filtering.
The right side of my chips are super low voltages.
Thanks!!!!!
Can you post your voltages? On the chips and at the Zener diode and pitch pot?
I am getting some freq filtering, but not auto filtering.
The right side of my chips are super low voltages.
Thanks!!!!!
Skyline FX 2013
- chicago_mike
- Tube Twister
Double checking my soldering this weekend. Had the wrong zener diode in them.
But also, I have 3mm red clear leds instead of the amber...I wonder if the forward bias is different enough to affect the pedal as well??
And does it matter what TL074 I use..I only have TI right now.
But also, I have 3mm red clear leds instead of the amber...I wonder if the forward bias is different enough to affect the pedal as well??
And does it matter what TL074 I use..I only have TI right now.
Skyline FX 2013
- chicago_mike
- Tube Twister
JOHNK
Dood!!! Help! I cannot verify the pcb layout.
Dood!!! Help! I cannot verify the pcb layout.
Skyline FX 2013
- chicago_mike
- Tube Twister
Whats yer voltages?
I'm hoping that maybe its just a bad IC or two, but I just can't get it to filter.
I'm hoping that maybe its just a bad IC or two, but I just can't get it to filter.
Skyline FX 2013
Nice job with that build johnk...looks great!
I bought an Agent 00Funk II this week, I love it!
I remember trying one in the shop when they came out and thought it was a bit peaky & sensitive, but
since I've been using compression in front of envelopes they're much more usable
I was a Mutron freak for years but sold them all off (for cash heh)
I'm sure the Agent Funk has a faster response than the Mutron, I was running a Minifooger Ring into
it earlier and it was totally mad responding to the beat freq...cool stuff!
I sold my last Mutron III a few years back, but that's paid for an Agent 00Funk II, Q-tron+ and a Proteus (with some $ leftover heh)
BTW, I'm a guitarist & Zappa nut, so I needs me envelopes!
I bought an Agent 00Funk II this week, I love it!
I remember trying one in the shop when they came out and thought it was a bit peaky & sensitive, but
since I've been using compression in front of envelopes they're much more usable
I was a Mutron freak for years but sold them all off (for cash heh)
I'm sure the Agent Funk has a faster response than the Mutron, I was running a Minifooger Ring into
it earlier and it was totally mad responding to the beat freq...cool stuff!
I sold my last Mutron III a few years back, but that's paid for an Agent 00Funk II, Q-tron+ and a Proteus (with some $ leftover heh)
BTW, I'm a guitarist & Zappa nut, so I needs me envelopes!