Danelectro - Dan-Echo: adding modulation to PT2395 delay

A forum devoted to mod, tips and suggestions for upgrading and rehousing your VERY CHEAP commercial stompbox to near boutique excellence.
User avatar
Kev77
Information
Posts: 13
Joined: 14 Mar 2009, 20:10

Post by Kev77 »

anyone tried anything like this on a reel echo for danelectro?
"gonna raise me an army of some tough sons of bitches - gonna recruit them all from the orphanages"
Bob Dylan is the man

User avatar
Uma Floresta
Breadboard Brother
Information
Posts: 118
Joined: 03 Nov 2007, 21:42
Been thanked: 1 time

Post by Uma Floresta »

Kev77 wrote:anyone tried anything like this on a reel echo for danelectro?
The Reel echo uses some kind of computer like chips to create its delay. And when you adjust the delay time on the reel echo, you get a stutter effect rather than pitch bending, so modulation of this sort isn't possible on a reel echo.

User avatar
Kev77
Information
Posts: 13
Joined: 14 Mar 2009, 20:10

Post by Kev77 »

thanks for that,,, nice sound pedal anyways
"gonna raise me an army of some tough sons of bitches - gonna recruit them all from the orphanages"
Bob Dylan is the man

User avatar
POE
Information
Posts: 1
Joined: 19 Oct 2010, 11:48

Post by POE »

Very cool. I'm assuming this is a common opamp I.C. Thanks for your time and posting.

User avatar
teej212
Breadboard Brother
Information
Posts: 108
Joined: 03 Jun 2009, 00:24
Has thanked: 4 times
Been thanked: 8 times

Post by teej212 »

would it be possible to add a LPF so i could control the tone of the repeats? i feel like it would be a doable mod, but i just wouldnt know what to do.

User avatar
Bernardduur
Transistor Tuner
Information
Posts: 1218
Joined: 24 Aug 2007, 07:36
my favorite amplifier: Welagen - ODR
Location: Losser.........
Has thanked: 94 times
Been thanked: 732 times

Post by Bernardduur »

Anyone has a schematic of this unit???
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1

User avatar
Moonibopper
Information
Posts: 22
Joined: 06 Oct 2010, 15:44
Been thanked: 2 times

Post by Moonibopper »

Thanks for putting this layout together. I tried to add it to a DIY neptune delay board, but the LFO is not working - the LED lights up but is not oscillating. I heard decreasing the value of R2 and increasing the value of C2 may help? What do changing these two components do? Any other tips? I tried both a Silonex NSL-32 as well as a KE-10720 LDR tied to a red LED and still doesn't work. Lights up, but doesn't oscillate.

User avatar
Moonibopper
Information
Posts: 22
Joined: 06 Oct 2010, 15:44
Been thanked: 2 times

Post by Moonibopper »

ANYONE???

Post Reply