Mid-Fi Electronics - Glitch Computer
Doug mentioned on ILF that he's discontinued this one this summer.
http://www.ilovefuzz.com/viewtopic.php?f=145&t=26715
I wanna know how this one works!
http://www.ilovefuzz.com/viewtopic.php?f=145&t=26715
I wanna know how this one works!
“Whenever you find yourself on the side of the majority, it is time to pause and reflect.” ― Mark Twain
- rousejeremy
- Breadboard Brother
Information
Great, now it's gonna be even harder to find and reverse.
I built a Slacktave once that kinda sounded like a Glitch Computer because I had screwed something up. Maybe the GC uses a CD4024 as well?
I built a Slacktave once that kinda sounded like a Glitch Computer because I had screwed something up. Maybe the GC uses a CD4024 as well?
- rousejeremy
- Breadboard Brother
Information
Actually, from the keyboard of Doug Deeper himself "it uses a 4013 a 386 and a 741...all in the wrong ways!!!"
Thanks for the info. I sent Doug a very caffeine/insomnia fueled email a while ago, asking about it & tossing out my own speculations. He didn't respond and I was wayyyyyyyy off anyhow.rousejeremy wrote:Actually, from the keyboard of Doug Deeper himself "it uses a 4013 a 386 and a 741...all in the wrong ways!!!"
“Whenever you find yourself on the side of the majority, it is time to pause and reflect.” ― Mark Twain
- rousejeremy
- Breadboard Brother
Information
If anyone knows of anyone with a Glitch Computer, get some pics!
I even put an ad on Craigslist trying to get some gutshots.
I even put an ad on Craigslist trying to get some gutshots.
I was asked from someone on r/guitarpedals to take pictures of the insides of this crazy beast and post em here. enjoy! hope this helps http://imgur.com/a/OoeVz
Man, I've wanted to put together one of these for a long time (it's near impossible to grab one locally).
Nice of you to post the shots, man.
I see a CD4013, LM741, LM386 (JRC variant), 10uF cap (blue), 2x 10k resistors (light brown), can't tell what value the pink resistors, transistor, diode, pots and the grey cap show and there's no underside so I can't trace it (is the back of the board covered with something?).
Does Doug still post around here?
Nice of you to post the shots, man.
I see a CD4013, LM741, LM386 (JRC variant), 10uF cap (blue), 2x 10k resistors (light brown), can't tell what value the pink resistors, transistor, diode, pots and the grey cap show and there's no underside so I can't trace it (is the back of the board covered with something?).
Does Doug still post around here?
- doug deeper
- Breadboard Brother
There's a voltage regulator in there. No transistor.
A couple .01uf caps, a .1, a couple 47uf, a 10uf.
The 741 is massively abused...as is the 386.
The cardboard is hot glued on, you may be able to pop it off,
But there is a resistor on the bottom of the board that may rip off.
A couple .01uf caps, a .1, a couple 47uf, a 10uf.
The 741 is massively abused...as is the 386.
The cardboard is hot glued on, you may be able to pop it off,
But there is a resistor on the bottom of the board that may rip off.
- rousejeremy
- Breadboard Brother
Information
No pics of the bottom of the board? Looks simple enough to figure out, and an AMAZING PEDAL!
Hi, everybody, lingering around here for quite some time.
I´m necro bumping this,
any news about this?
Best, TFS
I´m necro bumping this,
any news about this?
Best, TFS