Darkglass - Vintage Microtubes [schematic]
- Bernardduur
- Transistor Tuner
Got one it becase it had some huge issues; all sounds were horrible distorted and gating, only the gain potmeter did something.......
I found the problem to be the TL074 which were all shot. Replaced it with a new one and it again works like a charm!!
And some schematic; it doesn't state the capacitor values and my DMM that can read em is broken
I found the problem to be the TL074 which were all shot. Replaced it with a new one and it again works like a charm!!
And some schematic; it doesn't state the capacitor values and my DMM that can read em is broken
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
- Bernardduur
- Transistor Tuner
No idea! The owner got it second handed with these errors and hoped he could fix it! It was never resolved how it ended up being this way!thoglette wrote:Wonder what killed it - you've usually got to try really hard to kill one of them. Any ideas?Bernardduur wrote:I found the problem to be the TL074 which were all shot.
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
- Bill_Mountain
- Breadboard Brother
C19 looks way high???
- Bernardduur
- Transistor Tuner
F***; typo! I'll upload a new version later!Bill_Mountain wrote:C19 looks way high???
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
- Bernardduur
- Transistor Tuner
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
- Bill_Mountain
- Breadboard Brother
I really like this design. It's clean simple and it allows you to scoop your mids and run it direct because of the LPF. I knew this was good pedal but seeing this really shows how much Doug gets bass players and their needs.
- Silver Blues
- Breadboard Brother
Where are we at with the cap values? I will build one from the last vero once those are posted.
- Silver Blues
- Breadboard Brother
Be sure to give it a once-over before you build it so I can fix any last-minute mistakes if they appear. Wouldn't want you to build something this big from an incorrect layoutOnTheTundra wrote:Where are we at with the cap values? I will build one from the last vero once those are posted.
- Silver Blues
- Breadboard Brother
What I'd like to do, if you don't mind, is refer you here for the future. This is easier to keep updated without me taking up posts on this thread.
Information
- Posts: 10
- Joined: 09 Oct 2010, 19:18
- my favorite amplifier: U-Sound
- Completed builds: U-Sound Pedals:
more then 20 pedals made and more then 100 mods... - Location: Russian Federation
- Contact:
In the circuit there is a manifest error.
The frequency characteristic in this regard is far from the original.
R24 = 100k
The frequency characteristic in this regard is far from the original.
R24 = 100k
- Attachments
-
- darkglass error.jpg (26.2 KiB) Viewed 13164 times
- Bernardduur
- Transistor Tuner
It is a simple mid filter (as can be found here)Bigwan wrote:Sorry to dredge this up, but can anyone explain what the Era control is doing. My first thought was it was like a modified muff tonestack but I know it acts quite a lot on the midrange. Anyone?
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
- rocket8810
- Breadboard Brother
i know it's been awhile since anything moved on figuring this one out, but if your dmm is still broken and want/can send it out, i'd gladly test it to figure out the missing caps. would be real nice to get this one right man. btw, great work so far.
do we have any news on this one? i've breadboarded this and got nothing really.... i've used the values i thought that would be ok, but the only thing i got is a working blend control.any guesses maybe about the caps??
thanks
Savvas
thanks
Savvas
- Silver Blues
- Breadboard Brother
Ladies and gentlemen! I present to you, a complete, fixed and verified layout for the Darkglass Vintage Microtubes!
I have used three TL072 instead of a TL072 and TL074 because the latter arrangement was basically impossible to make a reasonable layout with. I have also added a 100K pulldown to the output per Savvas' recommendations.
The missing capacitor values, referencing the newest schematic in this thread, are as follows:
C18 @ JFET = 22nF
C18 in the filter network = 22nF
C16 = 22nF
C17 = 22nF
C8 = 220pF
C28 = 220pF
C24 = 1uF
C23 = 1uF
C20 @ last op-amp stage = 2.2nF
C20 @ Era control = 4.7nF
C25 = 1nF
C22 = 1nF
C27 = 1nF
C21 = 1nF
C10 = 220pF
Enjoy!
I have used three TL072 instead of a TL072 and TL074 because the latter arrangement was basically impossible to make a reasonable layout with. I have also added a 100K pulldown to the output per Savvas' recommendations.
The missing capacitor values, referencing the newest schematic in this thread, are as follows:
C18 @ JFET = 22nF
C18 in the filter network = 22nF
C16 = 22nF
C17 = 22nF
C8 = 220pF
C28 = 220pF
C24 = 1uF
C23 = 1uF
C20 @ last op-amp stage = 2.2nF
C20 @ Era control = 4.7nF
C25 = 1nF
C22 = 1nF
C27 = 1nF
C21 = 1nF
C10 = 220pF
Enjoy!
attention! there is a mistake on this schematic, so there is a mistake on the layout too...
the circuit round tone control, should be like a big muff's tone control..from c21 we should go to era pin3 and from era pin2 to the 10k resistor.
i've build the Silver Blues's layout above, and it worked, but didn't sound as good as in the demos. my friend that i build it for sent it back to me to see if i can make it bassier, and then i saw that the tone control part was similar to a B.M.'s. i immediately made the changes i suggested above and boom! sounds great! after that, i've build 2 more boards with an other layout i drew that allows a 1590b. So here is my layout. Verified
the circuit round tone control, should be like a big muff's tone control..from c21 we should go to era pin3 and from era pin2 to the 10k resistor.
i've build the Silver Blues's layout above, and it worked, but didn't sound as good as in the demos. my friend that i build it for sent it back to me to see if i can make it bassier, and then i saw that the tone control part was similar to a B.M.'s. i immediately made the changes i suggested above and boom! sounds great! after that, i've build 2 more boards with an other layout i drew that allows a 1590b. So here is my layout. Verified