Bypass switch/selector
- plush
- Cap Cooler
The easiest way is to simply bypass the buffer with a dip switch or panel mount togglePOTL wrote:Hello
Share opinions how to make the switch from true bypass to buffer
Like Mi Audio Boost n Buff or Wampler Decibel+
Couple of spdt or one dpdt should do the job
You can also turn on and off buffer's dc supply with another spdt to save your battery when you are in true bypass mode
- POTL
- Resistor Ronker
do you think this will work?plush wrote:Yeah, i guessPOTL wrote:bro can you make a cirquit or link to a cirquit?
link: https://i.imgur.com/3gX1JYJ.jpg
I then drew something similar but was not exactly sure
https://pp.vk.me/c636220/v636220754/2f3 ... KZU1fo.jpg
This is my version of the MXR Micro Amp and JHS Black Buffer
- plush
- Cap Cooler
There is no way it shouldn't.POTL wrote:
do you think this will work?
Also you'd better adjust your buffer's output volume to match the bypassed signal if you haven't done it yet.
- POTL
- Resistor Ronker
strange it seemed to me then that I have drawn corresponds to the fact that you sent the link to meplush wrote:There is no way it shouldn't.POTL wrote:
do you think this will work?
Also you'd better adjust your buffer's output volume to match the bypassed signal if you haven't done it yet.
regarding the volume knob - it was designed by MXR as I wrote above
on my circuit bypass DPDT switch goes on and there are 2 position
first bypass
second buffer
pins 1 and 4 on the bypass
5 and 2 are connected by track
6 and 3 on the buffer
that is, the buffer may be included along with a booster and separately
- phatt
- Transistor Tuner
This might help clarify the switch wire up you need. I've left out the Led as I'm sure that is ok
Phil.
Phil.
- Attachments
-
- 3-way switching.png (6.25 KiB) Viewed 1533 times