Hey guys. I was wondering if anyone has an Eagle library part for;
-Dual gang 16mm (standard alpha) pot which is board mounted or which the holes aren't offset (like the ones in the MB library)
-a DPDT switch which is board mounted or where the holes are a bit more spaced out than the on in the MB library.
Thanks in advance!
Need two Eagle library components.
- FiveseveN
- Cap Cooler
Information
Might be quicker to edit or make your own from scratch. Here's a tutorial: http://hackaday.com/2016/09/22/making-a ... le-part-1/
Ignorance more frequently begets confidence than does knowledge. (Charles Darwin)
FiveseveN wrote:Might be quicker to edit or make your own from scratch. Here's a tutorial: http://hackaday.com/2016/09/22/making-a ... le-part-1/
Interesting. I didn't know you could do this. Nice!
I may just use two regular pots and space them for a dual gang.
The switch is the real pain.
Thanks!
- Jarno
- Resistor Ronker
Information
- Posts: 363
- Joined: 12 Nov 2008, 10:18
- my favorite amplifier: Something nice
- Completed builds: Alembic-like state-variable and sallen-key filter preamps
Lovepedal Eternity
Phase 100
Brown source
Fuzz Face
Flipster
Alembic F2B (tube preamp)
Opamp and FET buffers
Loads of speakercabinets and ampracks
Busy building a modular synth (ssm2044 vcfs, preamps, ADSR's, VCO's, VCA's)
Tables
Bookshelves
Basses
So many things! :D - Location: Rosmalen, NL
- Has thanked: 27 times
- Been thanked: 81 times
Dual 16mm pots are in the pot lbr, I believe that's a standard library.
There's also a switch library, but there are several footprints, so you might want to dig a bit.
There's also a switch library, but there are several footprints, so you might want to dig a bit.
"It crackles....., but that's ok"