Ludwig Phase II vero.
- digi2t
- Degoop Doctor
I said i would do it, so here it is;
Unverified until built, but matches the verified schematic from R.G. Keen's build document. Should work fine. Use the GEOFEX build document for all the off board wiring, and for the switches, pots, and whatever else that isn't on the vero BOM.
NOTE: I used two 100uF caps in the power section, instead of four 47uF caps as required in the build doc. Use whatever suits you, spacewise. I'm also using 1 watt resistors for the LED's, instead of all those 1/4 watters in the build doc.
Everything here is also available here; http://www.aronnelson.com/gallery/main. ... +Phase+II/.
That's it... I'm stickin' a fork in this sucker.
Unverified until built, but matches the verified schematic from R.G. Keen's build document. Should work fine. Use the GEOFEX build document for all the off board wiring, and for the switches, pots, and whatever else that isn't on the vero BOM.
NOTE: I used two 100uF caps in the power section, instead of four 47uF caps as required in the build doc. Use whatever suits you, spacewise. I'm also using 1 watt resistors for the LED's, instead of all those 1/4 watters in the build doc.
Everything here is also available here; http://www.aronnelson.com/gallery/main. ... +Phase+II/.
That's it... I'm stickin' a fork in this sucker.
- digi2t
- Degoop Doctor
Yeah, but they'll have to pry the DIYLC out of my cold, stiff, dead hand.kaycee wrote:The sooner they lock you up and throw away the key, the better, you lunatic .
- digi2t
- Degoop Doctor
Not to my knowledge.hozy31 wrote:Has anyone had a go at making this thing yet as I am slowly aquiring the parts? Fascinated by this one!
- pinkjimiphoton
- Transistor Tuner
Information
- Posts: 1242
- Joined: 12 Sep 2010, 19:03
- my favorite amplifier: my own, a redesigned princeton
- Completed builds: so fucking many goddamn pedals it would make your ass hurt just looking at 'em all!!!!!
there's videos that totally suck of about 90 of 'em here:
http://youtube.com/666pinkster
gimme a like: http://facebook.com/pinkjimiphotonrocks - Location: new world order land (formerly la-la land)
- Has thanked: 358 times
- Been thanked: 480 times
- Contact:
damn,
it's gonna take a big enclosure!!!
i have one dino built for me, cuz he is my brother and an awesome human being..
but i may take a crack at this one of these days for shits n giggles.
it would be a blast to try and pull it off!!
it's gonna take a big enclosure!!!
i have one dino built for me, cuz he is my brother and an awesome human being..
but i may take a crack at this one of these days for shits n giggles.
it would be a blast to try and pull it off!!
"When the power of love overcomes the love of power the world will know peace."
Slava Ukraini!
Slava Ukraini!
Hozy, we need to petition Jimi, Dino and Mr Keen to kindly agree to doing another run of PCB's.hozy31 wrote:Has anyone had a go at making this thing yet as I am slowly aquiring the parts? Fascinated by this one!
Phil, i did build this on vero and never managed to get it going and have left it for about a year and half. Stills sits in front of me everyday like its teasing me.I know i have wiring issues with the switches but the schematic blows my brain every time i look at it Not to say i've given up on it, its now a case of audio probing and i'm just not looking forward to doing it If anyone could figure out the wiring to all the switches this would certainly help my debugging before audio probing?
Also, i did open a thread at GuitarFX layouts where i updated the vero so i cold visualise it better and tried to add the switching arrangements but i failed . Just search for the beast in the forum.