Amptweaker - BigRock/TightMetal Pro [traced]
- Belanger88
- Breadboard Brother
J0K3RX wrote:Here's a teaser 2:00AM and I gotta get some sleep... Stay tuned for more!
is the boost section jfet or mosfet?
Success is no accident. It is hard work, perseverance, learning, studying, sacrifice and most of all, love of what you are doing or learning to do.
- J0K3RX
- Degoop Doctor
Ok here are some raw images that I took with my phone. I need to clean the flux off this thing.. There is a thick candy coating all over the boards and even up on the transistors which I cleaned with a Q-tip and denatured alcohol.. I will probably end up removing the jacks from the main board. Need to pay attention on that because the jacks are different and that is why I screwed the nuts back in after I removed the board. They have different threads and different lengths. I may end up removing all of the pots from the daughter board but maybe not.. will see.
https://dl.dropboxusercontent.com/u/111 ... %20Pro.zip
I will be getting more pics but these should give anybody a good over all look at the pedal.
https://dl.dropboxusercontent.com/u/111 ... %20Pro.zip
I will be getting more pics but these should give anybody a good over all look at the pedal.
- J0K3RX
- Degoop Doctor
- rcustoms
- Resistor Ronker
Information
awesome work,please schematicsJ0K3RX wrote:If anybody cares, I am slowly kicking it's ass... Whoever created this board layout is completely insane!
- J0K3RX
- Degoop Doctor
It's coming along, slowly.. I may have something this weekend but don't hold your breath. My life is one distraction after another and by the time I am able get one moment to myself I am ready to go to sleep... I thought the tight metal was a twisted spaghetti bowl of traces but this thing makes that seem simple. It's not really that bad but the traces are all over the place and change sides constantly and it just never seems to end.... If not for my LED flash light being used as a PCB x-ray I would be Ska-Rewd!
thx for the share, you really2 help guitarist who want great pedal but dont have lot money like me.. hahahaJ0K3RX wrote:If anybody cares, I am slowly kicking it's ass... Whoever created this board layout is completely insane!
Its the final layout?
Btw its blur if i zoom. If you dont mind, would you share HQ pic?
- J0K3RX
- Degoop Doctor
I can assure you that this will be completed even if I have to box it up and send it to somebody else to finish! I have a son that has severe autism and he has been going through a rough time so, I haven't had time to even begin to get my head back into this twisted ass pedal... My son is 110% priority over everything else on the face of this earth, hope you can understand..
you want a higher res shot ok but, I can tell you that you won't be able to make any sense of it where I left off but, here ya go anyway..
Here are the really large images
https://www.dropbox.com/sh/oz8efydd4po9 ... 8Mu0a?dl=0
you want a higher res shot ok but, I can tell you that you won't be able to make any sense of it where I left off but, here ya go anyway..
Here are the really large images
https://www.dropbox.com/sh/oz8efydd4po9 ... 8Mu0a?dl=0
thx Mr. J0K3RX for the pic. I understand and im realy2 sorry if im ask in wrong time. Hope god show the way.J0K3RX wrote:I can assure you that this will be completed even if I have to box it up and send it to somebody else to finish! I have a son that has severe autism and he has been going through a rough time so, I haven't had time to even begin to get my head back into this twisted ass pedal... My son is 110% priority over everything else on the face of this earth, hope you can understand..
you want a higher res shot ok but, I can tell you that you won't be able to make any sense of it where I left off but, here ya go anyway..
Here are the really large images
https://www.dropbox.com/sh/oz8efydd4po9 ... 8Mu0a?dl=0
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 596 times
- Been thanked: 2061 times
Thanks to jokerx
tidied up layout and generated schematic cheers
bajaman
tidied up layout and generated schematic cheers
bajaman
be kind to all animals - especially human beings
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 596 times
- Been thanked: 2061 times
No lights
No boost
No loops
No worries
Just a Hammond 1590BB friendly board packed with components - all switches sockets and pots off board connected by flying leads.
added a 12 v regulator to protect the added charge pump from over voltage. will easily run off 9v dc (or up to 18v dc).
Pictures when built and tested - probably about 3 weeks away so don't hold your breath
cheers
bajaman
No boost
No loops
No worries
Just a Hammond 1590BB friendly board packed with components - all switches sockets and pots off board connected by flying leads.
added a 12 v regulator to protect the added charge pump from over voltage. will easily run off 9v dc (or up to 18v dc).
Pictures when built and tested - probably about 3 weeks away so don't hold your breath
cheers
bajaman
be kind to all animals - especially human beings
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 596 times
- Been thanked: 2061 times
The switches are all mini toggle type
cheers
bajaman
be kind to all animals - especially human beings