University paper on Audio Transformer Design (Kiev, 2012)
- marcao_cfh
- Breadboard Brother
Next year I'm planning on building a marshall 18w-like tube amp. I got everything but the chassis and transformers. Since I have plenty of time before I'll start to build the amp, I've thought about winding the transformers myself. Any good books or guides on power and output transformer designing and winding?
- marcao_cfh
- Breadboard Brother
That's a nice paper! The maths are easy to follow, and coincidentally I have a spare tube that can be used in a single ended 3,5W amp. Different primary impedance, but I can follow the paper to calculate my own transformer. Now I need to find something on push pull output transformer.
- Vitallka
- Breadboard Brother
In this paper, the transformer for a single-end output stage is not fully calculated. Power, non-magnetic gap is not calculated at all.BIGSMITTY wrote:http://www.standardsuniversity.org/wp-c ... _paper.pdf
I have several books and articles, but they are in Russian.
- modman
- a d m i n
Information
- Posts: 4898
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4411 times
- Been thanked: 2139 times
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal