Earthquaker Devices - Grand Orbiter

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
Beedoola
Resistor Ronker
Information
Posts: 383
Joined: 01 Feb 2008, 22:52
Location: Bay Area, CA
Has thanked: 15 times
Been thanked: 32 times

Post by Beedoola »

Anyone have any info one this circuit?

User avatar
destro
Breadboard Brother
Information
Posts: 123
Joined: 06 Oct 2007, 14:24
my favorite amplifier: Peavey Classic Series
Location: Kentucky
Has thanked: 8 times
Been thanked: 36 times

Post by destro »

I checked out the v1 at some point and found it was very similar to the ross phaser with mods similar to the ones at tonepad. I know they also mention the dod490, but found more similarities to the ross. Check out tonepad's add on stage board if you want deeper.

User avatar
Pokfor
Information
Posts: 10
Joined: 08 Aug 2014, 06:04
my favorite amplifier: Rock Seasons
Location: Russia
Has thanked: 12 times
Been thanked: 15 times

Post by Pokfor »

I was interested in this pedal. Who can make a photo of the board?

User avatar
modman
a d m i n
Information
Posts: 4890
Joined: 19 Jun 2007, 16:57
Has thanked: 4394 times
Been thanked: 2131 times

Post by modman »

Pokfor wrote:I was interested in this pedal. Who can make a photo of the board?
Who can use google?
image_100200.jpg
destro wrote:I checked out the v1 at some point and found it was very similar to the ross phaser with mods similar to the ones at tonepad. I know they also mention the dod490, but found more similarities to the ross. Check out tonepad's add on stage board if you want deeper.
Who can read?
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal

User avatar
plush
Cap Cooler
Information
Posts: 641
Joined: 08 Dec 2015, 09:29
Location: Moscow, Evil Russia
Has thanked: 36 times
Been thanked: 172 times

Post by plush »

Pokfor wrote:I was interested in this pedal. Who can make a photo of the board?
Google images
V3 is based on 3 lm13700 and 1 tl074 same as v2 does, but uses SMT and 1/8w resistors


Image
Attachments
Grand-Orbiter4.jpg
Grand-Orbiter4.jpg (70.35 KiB) Viewed 3056 times

User avatar
Pokfor
Information
Posts: 10
Joined: 08 Aug 2014, 06:04
my favorite amplifier: Rock Seasons
Location: Russia
Has thanked: 12 times
Been thanked: 15 times

Post by Pokfor »

I already saw these pictures, and believe me, I studied them in great detail. I used Google for a long time before writing here. I was hoping to see something more detailed than these two photos.
The fact that the base is coming from Ross, I already understood and confirmed on these photos, but it seems to me that interesting solutions on the diagram should.
For example, work Sweep. I understand how it is arranged theoretically, but I would really like to see it.
Depth is also interesting. I thought this controller controls the width of the LFO, but it turned out that it really mixes dry and wet signals.
Sorry for my english

User avatar
POTL
Resistor Ronker
Information
Posts: 335
Joined: 26 Sep 2016, 03:11
Has thanked: 58 times
Been thanked: 67 times

Post by POTL »

Need good photos of the board from two sides.
Let's think about what we have.
1) The site says that this is a 4-stage phaser, then 2 lm13700 are used in the phase shift phase
2) According to different sources - this scheme is based on DOD490 and ROSS Phaser, then 3 lm13700 is used in the LFO section
3) We have 4 channel op amp, if we look at the madbead project, we can understand how it is used
a) Input buffer
b) The virtual ground's buffer
c) Input filter
d) Output filter
Many argue that the sound is more like Phase 90 than Small Stone, so in the filter section, you should expect components that are similar in terms of denominations.
http://www.madbeanpedals.com/projects/S ... ht2015.pdf
viewtopic.php?t=1894&p=186129
Image

User avatar
Mehdi87
Information
Posts: 2
Joined: 20 Jan 2019, 01:41
Has thanked: 1 time
Been thanked: 1 time

Post by Mehdi87 »

Hello
I'm searching a long while for a Earthquacker grand orbiter
Does anyone have fundamental informations or shematic about that unit.

Thanks

User avatar
modman
a d m i n
Information
Posts: 4890
Joined: 19 Jun 2007, 16:57
Has thanked: 4394 times
Been thanked: 2131 times

Post by modman »

Mehdi87 wrote:Hello
I'm searching a long while for a Earthquacker grand orbiter
Does anyone have fundamental informations or shematic about that unit.
Please use the search funtion -- I merge your message with the relevant thread. There is only a schematic if somebody draw one, still some work to be done.
We could really do with pictures from both sides of the pcb.
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal

User avatar
Mehdi87
Information
Posts: 2
Joined: 20 Jan 2019, 01:41
Has thanked: 1 time
Been thanked: 1 time

Post by Mehdi87 »

hi, thanks for moving the request.
I found this pdf, it includes the diagram as well as the values ​​of all the parts, but not the pcb transfer
https://www.pedalpcb.com/docs/Circulator.pdf

Post Reply